Norm, you are 100% correct - this is dangerous, and if you don't know
exactly what you are doing, you shouldn't do it. A couple of years
ago I was working with about 2500 volts from a big power supply and
my attention wandered. I forgot to turn it off before reaching in to
move something. When the shock hit me I literally thought I was going
to die. After I picked myself off the ground, I put the supply away
and got a much less powerful hv source that was limited to 20 ua or so.
It is also important to know that even with the power off, the
capacitors will hold a charge for many hours if there are no "bleeder
resistors" in the circuit.
At 11:37 AM 1/2/2013, you wrote:
>On 1/2/2013 8:03 AM, Jeff Heiss wrote:
> >
> > Can you suggest a place where 800uF, 500v caps can be found?
> >
>At the risk of offending some on this list, be aware:
>
>800 uf at 500 v can be a lethal combination! 200 uf at 2000 v is
>absolutely LETHAL - and you only get one mistake!
>
>How do you intend switching this power? How will you generate the
>charging voltage (the charging voltage is also well into the lethal
>range!)? Safe enclosures, relay isolation, interlocks and grounding
>rods are required. It's not like transistor supply voltages. If you
>are not accustomed to this kind of voltage, please don't attempt it.
>
>Sorry to rant, but I speak from 65 years of industrial experience, much
>of that with 1Kv+ operations .
>
>Norm
>W6NIM
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>