Wow!
Many of us have tried using the backing from vinyl and sticker sheets. And I've made some PCBs using the vinyl cut to the pattern. But I don't think anyone tried Laser toner transfer using the vinyl itself!
I"m anxious to try this now. I have a few rolls of vinyl hear, maybe I'll run them through my laminator first at "foil" setting to test, as that is hot enough to melt toner. I don't want to ruin my Laser printer.
Steve Greenfield AE7HD
--- In Homebrew_PCBs@yahoogroups.com, "brucethehoon" <amorrow@...> wrote:
>
> I read this the other day:
>
> http://dangerousprototypes.com/2012/09/29/pcb-manufacture-using-oracal-vinyl-film-laser-printer/
>
> My results were SIGNIFICANTLY better than with the Pulsar paper, and I am getting results identical to my best photo transfers. I am Andrew in the comments.
>
> I link, in the comments, to the specific vinyl I used, but if there is interest in this group, I will re-try the same experiments with vinyl purchased from Amazon that features Prime shipping. I have lots of vinyl laying about, and can likely find some.
>