's just toner transfer - isn't it?
wonder if "water slide paper" is sold here and how it may be called...
st
On Wed, 05 Nov 2003 16:06:38 -0000, Dave Mucha <
dave_mucha@...>
wrote:
> Hi all,
>
> Al Willimas of Al Willimas books fame (PIC And STAMP) posted a note on
> the BasicStamps list about a way to add silkscreen.
>
> Message copied below.
>
> Dave
>
> ------------------------------------
>
> http://groups.yahoo.com/group/basicstamps/message/36967
> Message: 36967 From: "Al Williams" <alw@a...> Date: Wed Nov 5, 2003
> 10:13 am
> Subject: RE: [basicstamps] Re: Basic Stamp Schematic
> Actually, if you really want to do a nice job -- go to a craft or art
> supply store and get "water slide" paper. You can print on it with a
> laser printer and make a decal like you put on model cars, airplanes,
> etc. Of course the legend will be black but very sharp. The decal is very
> thin so component leads push right through it and the plastic vaporizes
> under heat so if you have any top-side soldering it will still work.
>
> This is a real life saver when you have had 500 boards made and they
> forgot to image the silk screen layer :-) Um, not that I've ever done
> that, no no!
> I'll deny it to the end.
>
> If you are highly motivated, get time on an ALPS printer which can print
> in white. There are ink jet water slide papers too but I haven't tried
> them.
>
> Al Williams
> AWC
> ∗ Floating point math for the Stamp or any micro
> http://www.al-williams.com/pak1.htm
>
>
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>