Hi All,
Any update on DIY spray ecthing systems, or at least about the suitable commercial pumps?
Regards.
--- In Homebrew_PCBs@yahoogroups.com, "cunningfellow" <andrewm1973@...> wrote:
>
>
>
> > David wrote:
> >
> > Hi All,
> >
> > Has anyone tried making this?
> >
> > http://www.instructables.com/id/Printed-Circuit-Board-PCB-Sprayer-Machine/?ALLSTEPS
> >
> > It looks very interesting!!
> >
>
> I would advise against it.
>
> Acrylic is not suitable material with CuCl.
> (PE,PP, PVC are all OK)
>
> Conical spray nozzles wont get a uniform etch.
>
> The high pressure pump is pressure relived AFTER
> going outside the tank with tiny little flimsy
> connectors.
>
> See
>
> http://www.prototrains.com/etch2/etch2.html
>
> Where his spray etcher had an accident with large
> barbed fittings and hose clamps.
>
> and imagine how much fun it would be to have that
> image at 3 min 21 sec into the video on the
> OUTSIDE of the tank.
>
> If you are going to spend 100s of $ on building
> one, follow Adams build. You will get good
> results with the fan nozzles and motorised PCB.
>
> If you only want small boards and spending $40
> sounds like more fun, just be patient. I am
> working on my write up.
>