Hi Harvey,
I use the Green Foil before I etch and it seems to fill any pin holes in the toner. It doesn't like to stick if the toner has any white residue from the toner transfer. To clean the toner, I just use a Mr. Clean Magic Eraser.
Baxter
--- In Homebrew_PCBs@yahoogroups.com, Harvey White <madyn@...> wrote:
>
> At a recent hamfest, I picked up (and not for much, so this was lucky)
> a Wavemaster II and a Superfuser, both by Dynaart (eventually became
> Pulsar).
>
> Although I have not contacted Pulsar yet about these wonders, I do
> have a few questions for anyone who has used them, and an observation
> or so:
>
> 1) looks like the superfuser is very very slow, but will do one pass.
> I've tried some PC board work with it so far, on 0.023 thick board,
> and it seems to be happy. One pass seems to do it, but there might be
> some edge issues, more later. I have the heat control set to about
> 3/4 of the maximum. Haven't tried the green foil yet. Anyone have
> observations about this and also, has anyone tried thicker boards?