No it is not. "solder melts above 327C/621F" is just wrong, even for
leadfree solder.
It may be the temperature you set on your soldering iron, but the
melting temperature is much lower:
<
http://en.wikipedia.org/wiki/Solder>
Typically you'd have a melting temperature of 220°C or below and a
reflow temperature of maybe 250°C for leadfdree, a little less for
leaded solder. If you make the hotplate much hotter you'll only toast
your boards a nice brown.
I would also prefer to avoid non-stick coating for a hotplate just to
get a bigger safety margin, a bare aluminium plate works well because
solder will not stick to it. You can put it on a cheap electric
cooking plate or even an old upside-down clothes iron.
ST
On Sat, Sep 3, 2011 at 4:43 PM, Ryan Bray <rbray89@...> wrote:
> Actually, that is a reasonable temperature for solder, especially rohs
> compliant material.
> On Sep 3, 2011 8:31 AM, "Stefan Trethan" <stefan_trethan@...> wrote:
>> Nonsense.
>> Please check your numbers.
>>
>> ST
>>
>> On Sat, Sep 3, 2011 at 4:01 PM, Donald H Locker <dhlocker@...>
> wrote:
>>> But solder melts above 327C/621F, so a hotplate soldering station should
> never be a non-stick one.
>>>
>>> Donald.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>