roel_cnc wrote:
>
> some links
>
> www.hendor.com for pumps i use m62 6000 liters p/h
> thats why i use 25 liters of etch and dont forget the anti foam
> additif or it will rise up to the sealing. :)
> www.bete.com for the nozzles i use similar to the nfs12 Fan 120°
> 4L p/m 20x that makes a total of 4800 L p/h
> heater is a 1 kw flat wire teflon coated no url aviable yet
>
According to the BETE data sheet the NFS12 is the smallest in the
series.
http://www.bete.com/metric/products/pages/nfs.htmThe performance graph of the M62 tells me that if you use 20x
NFS12 then the you are operating almost at maximum pump pressure.
i.e you are heavily restricting the flow.
At 1.2 bar the NFS12 puts out 0.306 liters/min, times by 20 gives
total flow of 6.1 L/min or 370 L/hour. You are only getting a
small fraction of the energy from this pump.