Try to bring the compressor back since you just bought it. It ought to work
well.
Bertho
=======================
From: abuakif Sent: Wednesday, August 10, 2011 08:52
Bertho,
I just purchased my rather expensive Airbrush gun along with non-oil based
compressor. The thing got really hot and shutted down when I worked with
Pebeo Vitrea paint. Now I start seeing the viability of your suggestion!
Anyway, I had spent $200 for this cheap, unreliable compressor.
Tun Zainal
--- In
Homebrew_PCBs@yahoogroups.com<mailto:Homebrew_PCBs%40yahoogroups.com> , "Boman33" <boman33@...> wrote:
>
> An alternative to a regular or specialized drillpress is to buy a small
air
> grinder for 1/8" bits. It has very high RPM, about 50,000 and perfect for
> the carbide drill bits. Attach it to a small linear precision slide, cheap
> on eBay, and you have the basis for a very accurate and efficient system.
>
> I built one about 20 years ago and I added an air operated cylinder to
> drive it from a footswitch. I also set up a laser pointer to make it even
> faster to drill. The grinder is only about $ 22 from Harbor Freight. See:
>
>
http://www.harborfreight.com/air-tools/grinders/1-8-eighth-inch-air-micro-die-grinder-47869.html
>
> Bertho
>
> ======================
>
>
>
> From abuakif Sent: Monday, August 08, 2011 06:59
> I did try using toner transfer technique (laminator + magazine) but my
drill
> stand is not really fixed. I am thinking on getting the Proxxon later. In
> Malaysia, all the tools are probably a lot more expensive than the one in
> the States (I used to live and studied in St Louis for almost 10 years
back
> in 1995 - 2001).
>
> Anyway, I just came back from a hardware store getting a airbrush
compressor
> and just ordered Pebeo Vitrea 160 from Kuala Lumpur. Also, I just
purchased
> an oven. These few days will be focused on getting the solder mask and
> silkscreen using the technique described by Retromaster.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]