Is there a tutorial on the module editor and manipulating the components
libraries?
I have a bunch of duplicate parts after including the new library files ..
I need to UNDO that .. and start over ..
Thanks for the wiki mini .. it came up fine ..
Randy
________________________________
From: Donald H Locker <
dhlocker@...>
To: Homebrew PCBs <
Homebrew_PCBs@yahoogroups.com>
Sent: Mon, February 21, 2011 9:21:22 AM
Subject: Re: [Homebrew_PCBs] Re: Free PCB question
It was there a few hours ago :( Honest!
OK. It was there a few days ago (I wrote the few hours sentence on Friday,
though it was not quite accurate anymore by then). According to
<
http://kicad.sourceforge.net/wiki/News#2011.2F02.2F16:_New_Wiki_Online>
SourceForge got hacked.
<
http://kicad.xor-gate.org/wiki/index.php/Mini_tutorial> is the location of the
mini-tutorial I referenced, but there are a few images missing from it. Still
good info.
Regards,
Donald.
--
∗Plain Text∗ email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ ascii ribbon campaign - <www.asciiribbon.org>
----- Original Message -----
> From: "Randy S." <rj3819@...>
> To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> Sent: Saturday, February 19, 2011 7:14:50 PM
> Subject: Re: [Homebrew_PCBs] Re: Free PCB question
>
> when I try the link for the mini-tutorial I get this :
> There is currently no text in this page. You can search for this page
> title in
> other pages, or search the related logs.
>
>
> The FAQ is fairly informative though .. reading thru that now
>
>
>
>
> ________________________________
> From: Donald H Locker <dhlocker@...>
> To: Homebrew PCBs <Homebrew_PCBs@yahoogroups.com>
> Sent: Sat, February 19, 2011 6:59:00 PM
> Subject: Re: [Homebrew_PCBs] Re: Free PCB question
>
>
> <http://kicad.sourceforge.net/wiki/index.php/Mini_tutorial> is a great
> place to
> start. The basic process is eeschema (make a schematic), cvpcb
> (associate
> modules to schematic components), import the netlist to PCBnew to make
> the pcb.
> Pretty quick and painless. Each step in the process does one thing
> only and does
> it very well. Makes no assumptions about what came before or what
> comes next,
> just does what you tell it.
>
> It's not like a lot of programs that try to intuit what you are going
> to do next
> and get it wrong just enough to completely destroy any advantage that
> the other
> correct guessing may have had.
>
> Donald.
> --
> ∗Plain Text∗ email -- it's an accessibility issue
> () no proprietary attachments; no html mail
> /\ ascii ribbon campaign - <www.asciiribbon.org>
>
> ----- Original Message -----
>
> > From: "Randy S." <rj3819@...>
> > To: "Homebrew PCBs" <Homebrew_PCBs@yahoogroups.com>
> > Sent: Saturday, February 19, 2011 5:34:49 PM
> > Subject: Re: [Homebrew_PCBs] Re: Free PCB question
> >
> > HOW RUDE !! LMAO .. just kiddin
> > Well .. I will migrate to one of the others as soon as I have
> time..
> > I will say one thing about the FreePCB ..
> > Using that and having to deal with the "nets"
> > has been instructional .. and when making that board ..
> > I have some "conflicts" where I couldnt attach a wire
> > to a pin on a part because it was on a different net .
> > BUT .. this time .. thanks to everyones patience and
> > kind assistance .. it made sense and I knew what to do to fix it .
> > It kind of reminds me of switches and hubs and segments / collision
> domains.
> > On the note of OTHER software .. I am playing with KICAD in ubuntu
> > and created a schematic, but when I click on the PCB button ( forget
> what its
> > called and I am at work )
> > it opens the board editor with a blank sheet ... shouldnt it bring
> the
> >schematic info
> > over into the board layout ? Or is it a manual import type thang ?
> LOL
> > I'm thinking it should do what Eagle does when you switch to the
> board
> > editor.
> >
> > Thanks again all
> >
> > Randy - N2CUA
> >
>
> [snip]
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]