Free editors I suggested earlier are:
a)
I have briefly tested Suigyodo Schematic
(
http://www.suigyodo.com/online/e/index.htm) and it seems to work fine
and is capable of generating compatible netlists including footprint
names to be included in the netlist.
b)
LTspice shematic netlist outputs can be edited to add footprints. See:
http://www.diyhifi.org/forums/viewtopic.php?f=15&t=1114 <
http://www.diyhifi.org/forums/viewtopic.php?f=15&t=1114>
LTspice is a fantastic combined free schematic pgm/SPICE simulator
available from:
(
http://www.linear.com/designtools/software/ltspice.jsp)So do your schematic and simulations in LTspice, then export the netlist
and make it compatible to FreePCB.
On 2/19/2011 8:09 AM, Randy S. wrote:
>
> I would but .. sorry for ignorance here .. dont see a schematic editor
> with
> FreePCB ??
> Do I import it form another program?
>
> ________________________________
> From: Leon Heller <leon355@...
> <mailto:leon355%40btinternet.com>>
> To: Homebrew_PCBs@yahoogroups.com <mailto:Homebrew_PCBs%40yahoogroups.com>
> Sent: Sat, February 19, 2011 7:28:06 AM
> Subject: Re: [Homebrew_PCBs] Free PCB question
>
> On 19/02/2011 00:19, Randy S. wrote:
> > Its a very simple high voltage power supply board ..
> > can do it my head easy enough ..
> > Just diodes, bypass caps, glitch and surge resistors.
> > Thats it ..
>
> I'd create a schematic for that. It'll only take a few minutes and would
> prevent a wrong connection on the PCB.
>
> Leon
> --
> Leon Heller
> G1HSM
>
> [Non-text portions of this message have been removed]
>
>