Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Re: Building an etching tank?

From: Philip Pemberton <ygroups@...>
Date: 2011-01-27

On 26/01/11 20:46, Stefan Trethan wrote:
> You might not want to do this in a good sink. FeCl stains like hell, even
> porcelain is difficult to keep clean.

JohnsonDiversey "Titan Sanitiser" works a treat for getting rid of FeCl
stains. Rinse the sink out to dampen it, turn off the tap and count to
ten. Cover the inside of the sink in the stuff (it's a powder) and rub
it on the stains. Rinse away the remaining powder (it's water soluble).

Make sure you wear gloves! This stuff is nasty -- it's used for
disinfecting hospital floors. If you can't get hold of it, Swarfega
might also work. Essentially what you want is a substance which is both
a mild abrasive and a detergent.

As long as you don't, say, wait a day between using FeCl in the sink and
cleaning it, you should be fine.

--
Phil.
ygroups@...
http://www.philpem.me.uk/