On Sat, 15 Jan 2011 03:35:11 -0000, you wrote:
>
>> Rubbermaid or the equivalent plastic cereal container. Takes lots of
>> etchant, but has never deteriorated. Be careful with some of the
>> sealing rings, they disintegrate.
>>
>> Worked with FeCL3 and CuCL etchants, never leaked.
>>
>
>
>After I gave up on the Fish Tanks and using FeCL3 I now use CuCL in a Plastic Container that I keep on the back porch. CuCL is a lot cheaper to use than FeCL3.
>
>
>Ben
>
>
When I switched over from FeCl to CuCl I used the same plastic
tray with snaps on all four sides that I had used for several years.
It had a red plastic seal. A few weeks later I went to use the CuCl
to etch another board and the cover was really loose. The CuCl
had destroyed the seals; turned them into a white, crumbly substance.
There was a tray containing several partially discharged batteries sitting
beside the tray. The terminals on both ends were severely corroded.
Keith Bowers WB4LSJ- Thomasville, NC