why not build the rotrary spray etcher?
it sed only a plastic pipe, with holes for spraying on the upper part.
high speed driven by a motor on top of the tank.
we discussed this here a time ago...
st
On Tue, 30 Sep 2003 15:00:39 +1000, Adam Seychell
<
adam_seychell@...> wrote:
> Anyone here every built a spray etcher ?
> I'm looking at building a spray etcher on the cheap, but I cannot find a
> suitable pump. Pressure requirements are fairly high for sprays nozzles
> to work effectively. The pump must be capable of at least 10 meter head
> (1 bar), but all low cost fountain pumps are rated no more than 4 meters
> head. Getting hold of a pump is the killer. Example, the Iwaki MD-70RZ
> has 16 meter head but sells for AU$500. The etchant I'm using won't
> effect stainless steel.
>
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>