I have the theory for ds worked out, but I haven't implemented
it. The X axis is fixed by the paper guide, but will probably need
to be changed to something longer. The Y (motion) axis needs a sensor
that tells the mcu when the moving pcb has reached a point
approximately where the Paper In Sensor was. It is this sensor that
(I think) starts the timing for the actual print. A slot in the
carrier with an optical sensor should work fine. The rest is just a
tweak in the software.
Mark
At 02:19 PM 5/13/2010, you wrote:
>That sure looks GOOD!!! If my Toner Transfer wasn't working so good
>I'd sure be looking at your process - Didn't you say you are still
>working on getting double sided to line up?
>
>Thank you for sharing all your GREAT work.
>
>Ken H>
>
>
>--- In Homebrew_PCBs@yahoogroups.com, Mark Lerman <mlerman@...> wrote:
> >
> > I have posted the final pictures of the process, including a photo of
> > the first board run through the converted printer. If anyone is
> > pursuing this technique, please let me know how you are doing.
> > <http://www.pbase.com/mark10970>
> >
> > Mark
> >
>
>
>
>
>------------------------------------
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>