Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Reducing concentration of HCl from 10% to 40%

From: Adam Seychell <a_seychell@...>
Date: 2010-01-19

Roger Blair wrote:
>
>
> I wish to prepare some HCl/H2O2 etchant, and I have 10% HCl. (10% HCl is
> $5 per gallon, but 40% HCl which is what I need is a lot
> more expensive)
>

You would end up less than you started with as others have commented.
30~35% (wt) HCl is readily available as brick cleaner/ pool acidfier
here in Australia. Even sold in 250ml bottles up to 20L drum at some
local hardware stores. Its possible to remove some of the water, but not
practical. Normally, dry HCl is produced in an oven and then dissolved
in water until saturation, of which you get about 35% acid at STP.

Adam