Uh, yeah, but the entire point of my post is that the direct printing
is strangely smeared - that's what the pictures are of. Interested to
see if it's just a mac thing, or a me thing.
PG
On 06/09/2009, at 10:04 PM, Daniel Johnson wrote:
> Piers,
>
> Why are you creating a pdf ? You can print directly from eagle.
>
> 3v0
>
> --- On Sun, 9/6/09, Piers Goodhew <piers@...> wrote:
>
> From: Piers Goodhew <piers@...>
> Subject: Re: [Homebrew_PCBs] Eagle (Mac) print quality
> To: Homebrew_PCBs@yahoogroups.com
> Date: Sunday, September 6, 2009, 11:36 AM
>
>
>
> On 05/09/2009, at 7:06 AM, Daniel Johnson wrote:
>
> > Interesting problem.
>
> >
>
> > Try loading the eagle PDF into inkscape and have a look at it.
>
> Well, if it looks fine in Illustrator (and Preview) I'm pretty
>
> confident the PDF does not have whatever it is that the direct to-
>
> printer. What I did notice only when I'd uploaded the images (made
>
> much more obvious by the scanner's auto-sharpen) is that every fill is
>
> offset a little to the lower left to the outlines ...
>
> I did try eagle -> PDF -> some other app -> Print and ... the smear is
>
> gone, although something else has happened to drill holes - I'm lucky
>
> enough to have Illustrator, I think I'll be sticking to that route!
>
> > I make solder paste stencils by printing the tcream layer in eagle.
>
> > Next I load it into inkscape and then switch to the outline view.
>
> > The files is saved as a SVG and then cut on a critcut machine.
>
> >
>
> > A PCB like the one in your example can be easily cut. I am still
>
> > working on finer pitch parts like TQFP.
>
> That would be nice, but it also etched just fine, my first flirtation
>
> with 10mil traces and running things under SMD parts. Infuriatingly, i
>
> managed to break a trace with the drill chuck ...
>
> PG
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>