I usually drill a few holes before etching to allow getting the backside lined up good (on double sided boards), then drill all the other thru holes after etching. I leave a small "etched" space in the center of each pad that will have a hole drilled - this seems to help center the drill point for drilling.
73 de Ken H>
--- In Homebrew_PCBs@yahoogroups.com, michael tenore <wb2lcw@...> wrote:
>
> I usually drill before stripping ! It makes it easier to spot center the hols when I drill with my dremel drill stand..
>
> ________________________________
> From: DJ Delorie <dj@...>
> To: Homebrew_PCBs@yahoogroups.com
> Sent: Tuesday, August 11, 2009 12:00:41 PM
> Subject: Re: [Homebrew_PCBs] Picture of board done with HP presentation paper
>
> Interesting question - strip toner first, or drill first? I'd think
> the burrs from the drilling would interfere with the toner removal.