Hi ! am using a HP2100 ($25 Craigslist) and a Xerox 2125! Both are execellent!
Why dont you look on craigslist for a Used HP laserjet. In New York there are dozens available cheap!
I even found a HP laserjet 4 in the trash across the street the other day.
HP4's and HP 5MP with postscript are easlily found! and genuine HP toner is going cheap..
even on eBay!
My HP 2100 transfres easily with HP presentation paper in only a minute or so.
73
Mike
________________________________
From: sailingto <
sailorman@...>
To:
Homebrew_PCBs@yahoogroups.comSent: Thursday, May 7, 2009 12:46:49 PM
Subject: [Homebrew_PCBs] Re: GBC H535 Laminator
Good deal Mike - we will "stay tuned". What printer/toner are you using?
As you saw from an earlier post, I'm VERY interested in a laminator that will work with the Brother 2140 printer. That toner seesm to require a higher temperature than normal toners. There is a label inside the cover on the printer that says "Caution - 415F" and shows the toner as "TN-330/TN-360"
Does anyone know what that toner label means? Are there two types of toner?
Thanks to all for any info.
73 de Ken H>
--- In Homebrew_PCBs@ yahoogroups. com, michael tenore <wb2lcw@...> wrote:
>
>
> Hi !
>
> I recieved my GBC H535 laminator today from UPS and I checked out the manual!
>
> It says the maximum passtrough thickness is .1 inch 2.54mm.
>
> I willl not have a board to try out for a couple of days.
>
> The max temperature so far is 338 degrees F. But the speed is variable.
>
> Stay tuned
>
> Regards Mike
>
[Non-text portions of this message have been removed]