Hi Mark,
Good idea. I was planning to use steel brush. I can try roller method, my only concern is if surface is not flat how to guarantee to touch all traces with roller.
Cheers,
Volkan
--- On Thu, 4/23/09, Mark Mickelsen <MarkMickelsen@...> wrote:
From: Mark Mickelsen <MarkMickelsen@...>
Subject: RE: [Homebrew_PCBs] Re: Free bottle of Liquid Tin
To: Homebrew_PCBs@yahoogroups.com
Date: Thursday, April 23, 2009, 12:31 PM
Hi Volkan,
Could you possibly rig up some sort of steel roller to go over the surface
of the board to make starting the reaction easier and more thorough? I'm
not familiar with the process at all, but that was the first thing I thought
of when I read your post about electroless plating.
Regards,
Mark
_____
From: Homebrew_PCBs@ yahoogroups. com [mailto:Homebrew_PCBs@ yahoogroups.. com]
On Behalf Of Volkan Sahin
Sent: Thursday, April 23, 2009 1:21 PM
To: Homebrew_PCBs@ yahoogroups. com
Subject: Re: [Homebrew_PCBs] Re: Free bottle of Liquid Tin
Hi Mike,
I used their electroless nickel kit. It works fine only problem is you need
to touch every trace with a steel rod to start the reaction. Plating
thickness is really good and it is better than electroplating very uniform
and shiny because of that it is much better than immersion tin plating.
My application was THP, after activating holes with conductive ink I used
electroless ink to plate the holes. Soldering is not so difficult.
Cheers,
Volkan
--- On Thu, 4/23/09, Mike Oyama <mikesb0x0fm4il2@
<mailto:mikesb0x0fm 4il2%40gmail. com> gmail.com> wrote:
From: Mike Oyama <mikesb0x0fm4il2@ <mailto:mikesb0x0fm 4il2%40gmail. com>
gmail.com>
Subject: Re: [Homebrew_PCBs] Re: Free bottle of Liquid Tin
To: Homebrew_PCBs@ <mailto:Homebrew_ PCBs%40yahoogrou ps.com> yahoogroups. com
Date: Thursday, April 23, 2009, 11:23 AM
I've been thinking about picking up an electroless plating kit from caswell.
The electroless nickel kits are 30% off till the end of the month, making
the mini kit around $50.
I know the pros use electroless nickel followed up by a gold immersion
process. Will my boards work if I don't add gold plate to the nickel? Will
nickel work as good as tin?
>
> > You definitely get a better plating by using a electroless Tin
> > plating. Using solder and an iron produces a bit of waviness or
> > bumpy surface (not to mention the flux which needs to be scrubbed
> > off). The elctroless Tin plating results in a very smooth layer.
> >
> > I used to have the recipe for a wonderful electroless Tin plating
> > solution based on Stannous Chloride, Sodium Chloride, and Sodium
> > Cyanide. Now that I'm older and wiser (and still alive), I no longer
> > use that particular material.
> >
> > Dave
> >
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]