The laminator cost me about $100, but there are less expensive ones.
Your 4x6 may get hot enough. Never hurts to try.
From what I have read you will have to be careful with the amount of
washing soda you add to the water. To clean up my first mistake I just
dumped some in hot water and soaked. I think if you get it too strong
it could dissolve away exposed parts as well.
I will be interested in hearing how the t-shirt transfer works.
Damon
--- In Homebrew_PCBs@yahoogroups.com, "Ray" <rahz@...> wrote:
>
> Thanks Javaguy, a picture is worth a thousand words. I have never used
> the soda wash product before but now that I see the box I am sure I
> can find it at the store. I am going to start experimenting with the
> resist that you sent but I don't have a nice laminator like you (only
> a little 4X6" model that I doubt will get hot enough). I do have a HIX
> heat press, the kind used to put heat transfers on t-shirts that I
> found at a flea market. It has adjustable heat and pressure control as
> well as a timer. This might simplify things a bit, eliminating the
> need for a carrier as well as the multiple passes through the
> laminator. I think I can tack the resist to the board with a tack iron
> so it won't slip around while I am positioning the board. I am very
> interested in your next series of pictures dealing with exposure and
> development.
>
> Rahz
>
> Heat press:
>
http://www.transferbusiness.com/?pageto=n_hix.htm&gclid=CIzT7NG-rZECFSOYiQodRgygYw
>