It is very rare that i have to re-do a transfer, certainly less than
5%. Even then it is not a matter of throwing out the board, just
removing the toner and repeating the transfer. The most trouble i
currently have is with the printer. It makes dark lines on the paper
and in other areas there is only light toner. Probably need to replace
the toner and drum unit, but it is so expensive i might as well get
another printer ;-)
ST
On Jan 28, 2008 6:06 PM, Huggermugger <yahell@...> wrote:
> Frankly Stefan, is the Toner Transfer Method (TTM) working as good as any other kind of method? I have a laser printer but also on rare occassions a little sunlight ....
> I tried to iron topner transfer on a piece of aluminium sheet and that worked .. almost, but I do not want to throw a way lots of PCBs ...
>
> Magnus
>