Greetings...
QUICK INTRODUCTION:
I run and maintain a website and group of nearly 500 members who build
1:1 scale robots from movies.
I am currently part of a few different groups working on different
robots at the same time.
I have just finished one of mine, and nearly complete with the second,
just starting my third and preparing for the fourth which will launch
near June.
I have discovered that I am not able to design and build my own boards.
(the hard way).
Yet, the need for these boards still exists for the robots.
This is why I joined this group, in hopes of connecting with individuals
who are able, and willing to design and build these boards for my group.
Obviously there will be compensation involved.
An example of a board we use would be the following:
1 Board with 12V (cigarette lighter plug) input for charging 12V
batteries in the robot.
Board need to have automatic switch to disconnect the connection of the
batteries to the robot while in charge mode, an indicator led showing
whether it is in charge mode/operation mode. and a shut off when the
batteries are fully charged.
This board would also need a LED power indicator showing the level of
charge the batteries carry, and perhaps a pizo alarm when they need to
be charged.
A pot on the alarm to adjust when it goes off would be nice as well.
Would it be possible to Bid this job out on this board?
If so, I can be contacted off board
jawalunk@...Thank You all!
Jawa Lunk <
http://www.kingofbots.com>
[Profiles, pics, videos, Buy, Sell & Trade Droid Parts and Props!]
<http:www.the-sandcrawler.com>
www.KingofBots.com <
http://www.kingofbots.com> | Lunk's Projects
<
http://www.kingofbots.com/3.html> | Droid Parts
<
http://jlmech.ecrater.com>
www.Wall-EBuilders.com <
http://www.wall-ebuilders.com> - Official
Wall-E Builder's Group
MySpace <
http://www.myspace.com/jawa_lunk> - Lunk's Spot
[Jawa Lunk's Facebook profile]
<
http://www.facebook.com/people/Jawa_Lunk/844359732>
[Non-text portions of this message have been removed]