thanks.
DIY means Do It Yourself.
i found out these english guys call their "baumarkt" DIYstore.
i initially wanted to buy it for desoldering.
i have a unregulated one (eur 15 or so).
its scrap, the wire gets white glowing if you use reduction nozzle (and will
fail if you really try it).
i thought of making the regulation in there by myself, using the wire used
as a voltage dropping resistor for the fan as my sensor element (couldn't find
ntc/ptc which is made for 600 deg. c. )
but i do not longer want to make this.. too much effort to get the tiny
sensing signal to a bridge when nearby is a triac controlled interference sender
(the heater).
do you know what i hate:
the good tools are expensive.
there is no way around - you get what you pay.
and ebay doesn't have anything anytime... well if you can wait.........
ok, thanks, i will see if i get it... but this is not urgent at all..
regards
stefan
--
+++ GMX - Mail, Messaging & more
http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!