Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Etching Tips and Tricks

From: DJ Delorie <dj@...>
Date: 2007-06-26

Kamal Shankar <kbshankar2000@...> writes:
> I think this would be too risky for us TT types who use the Flyers
> for transfer and often have to "correct" bad traces by a Sharpie ?

Well, it's worth a try anyway, but even with the special Pulsar paper,
Pulsar strongly recommends adding the TRF to seal the toner.

http://www.pulsarprofx.com/PCB/a_Pages/5_Support/5b_Tips_Tricks/Tips_Tricks.html#Anchor-49575

Have you tried the pulsar paper? Or, you can buy just the green TRF
from digikey for $9 for an 8"x15' roll.