--- In
Homebrew_PCBs@yahoogroups.com, "docstein99" <docstein99@...> wrote:
>
I read somewhere that using a thin, flexible clad board,
would not require to modify the printer.
wonder if using the Single Sided .014 (.036mm) Thick,
1 oz Copper being sold at www.digikey.com ,
manufactured by Injectorall) ( catalog page 1945 )
as follows :
Dimensions Digi-Key Price Injectorall
Inch (cm) Part No. Each Part No.
3 x 4.5 (7.62 x 11.43) PC94-ND 2.33 PC94
4 x 6 (10.16 x 15.24) PC95-ND 4.35 PC95
6 x 6 (15.24 x 15.24) PC95-S-ND 5.18 PC95-S
6 x 9 (15.24 x 22.86) PC96-ND 7.78 PC96
12 x 18 (30.48 x 45.72) PC97-ND 23.37 PC97
would require the printer mechanical modification.
I understand most printers have a way to print
thick envelopes, which should be ok for the thickness
of the boards above [.014 (.036mm)] I THINK .
juan