An upgrade has just been published for Diptrace, v1.40. There were
many significant additions and improvements. For this group the two
new goodies are the ability to set the colors on the printout (direct
to inkjet printing). and the free version now supports manufacturing
file outputs. like DXF and gerber. Included is a isolation milling
output.
Oh yes, for those EAGLE users, Diptrace now includes a couple of
ULP's to allow Diptrace to import EAGLE schematics and board files.
The free version is limited only to the number of pins, not the size
of the board.
Myc
Former EAGLE user and Diptrace convert
--- In Homebrew_PCBs@yahoogroups.com, "izzo47" <izzo47@...> wrote:
>
> My 2-cents.... I emailed Hammermill and they sent me two sample
packs
> so I got 50 sheets from them. I also ordered from officebella.com,
> paper was 6.74, and s/h 6.75 so now I have 350 sheets of paper, BUT
> I'm waiting on a part from Electronix-Express so I can make the
> pattern. My other pennies worth, I'm now using Diptrace (another
> yahoo group) and I must say it is really a good piece of software
and
> is worth a try.
> Izzo
>
> --- In Homebrew_PCBs@yahoogroups.com, "wb5kye100" <jflan@> wrote:
> >
> >
> > I've been experimenting recently with the different papers that
> others
> > have been reporting the pros/cons and wanted to 'chime' in with
my
> vote:
> >
> > Hammermill 163020
> >
> > Glossy both sides, light weight so it soaks through quickly. Easy
> > removal following cooling period. CHEAP!!
> >
> > I personally think this stuff is great! The three boards that I
> have
> > used this stuff on were perfect. I also felt that the paper
removal
> > following a brief water soak was especially easy!! I ended up
> buying
> > mine online through Sams Club (as some others recommended). My
> total
> > cost was $7.00 + $4.95 shipping. Paper was ordered on Sat. and
> received
> > it on Tues, this past week. My opinion is that this is the way
to
> go,
> > as I see no difficiencies.
> >
> > I realize that this has been discussed before, but I thought I
just
> HAD
> > to express my delight. If you don't have a Sam's Club
membership,
> find
> > someone that does and have them order it for you, just get this
> > stuff...
> >
> > Jim [:D]
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>