Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

>I can just get away with 0.008"(0.20mm) lines/spacings.

That should be walk in the park. At least with a $100 Epson and Epson's
transparencies it is. Here's 6/6 rules in a worst case scenario;

http://www.pbase.com/eldata/6_6_rules

Spacing irregularities are due to the printer and not the process.

--- In Homebrew_PCBs@yahoogroups.com, Adam Seychell <a_seychell@...>
wrote:

>