> ink esp the pigment ones seems to me
> has many of the same properties as oil the dye based around the same
>
> but copper isnt and will ignore the cyano acrilate fumes
Well, you could explore that method, but it then would add a burden to
the delicate process.
I feel curing the ink to the board may best lye in PREPARING the board
before you print. Somehow coat the board with a chemical that will let
the ink adhere and seal, and still allow the etch to disolve the copper.
If only there was a good chemist around, I am sure that would be real
handy right now.