I am using the GBC 200 that I got off of Ebay. I moddified it per the
instructions on Pulsar. It's easy and with the mod I can push .062
boards thru with two pieces of the Pulsar and it's about .090 thick and
still use it as a laminator for paper.
Most of the time I use just the toner and photo paper thru this
laminator and run it thru at least 6 - 7 times if not more. Don't have
to use the iron anymore not even to "tack" the pattern on the copper.
Staples doen't carry this laminator anymore but the next model up which
is $$ for me. The one I go off of Ebay was $39.00.
HTH
--- In
Homebrew_PCBs@yahoogroups.com, Martin Klingensmith <martin@...>
wrote:
>
> Hello,
> I have made a few boards with the toner transfer method, and I've
> decided that it would be more consistent to get a laminator. I was
> hoping to find out of a model that would work well without too many
time
> consuming modifications. If you have a laminator or fuser that works
> well, I'd like to know what model it is and how much it costs.
> I'm sorry I know this is probably a common question but the Yahoo
group
> search is useless.
> Thanks
> Martin K
>