Thanks for the tip, now thats the kind of postive feedback I join a group like this for.
Jesse
----- Original Message ----
From: Stefan Trethan <
stefan_trethan@...>
To:
Homebrew_PCBs@yahoogroups.comSent: Thursday, November 9, 2006 12:54:14 AM
Subject: Re: [Homebrew_PCBs] Avery T-Shirt Transfer Paper
On Thu, 09 Nov 2006 09:31:13 +0100, Lez <lez.briddon@...> wrote:
>
> You may have to bin it, because cleaning the gunk off may actually
> damage the heater roller, mine has a thin rubber film to it.
It's usually a teflon coating, like a cooking pan. Don't scrape on it with
something hard, if the gunk doesn't come off you can heat it to operating
temperature and then wipe it off (avoiding burns as much as possible).
There's usually a felt cleaning pad in contact with the fuser roller,
check that out it is probably all gunked up and just spreading the stuff
if much came off.
If you damage the teflon you get marks on each page.
ST
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs
If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
Yahoo! Groups Links