--- In
Homebrew_PCBs@yahoogroups.com, "Jim Lewis" <jim.lewis@...>
wrote:
>
> I'm new here but has anyone summarized the easiest way to setup for
> direct inkjet - the best printer to use, detailed steps, etc. I hope
> Sahin's blog, which gets into firmware etc, is not the easiest.
>
http://techref.massmind.org/techref/pcb/etch/directinkjetresist.htmThe C84 is probably the easist. If you use the super thin stock, you
can skip most of the physical modifications to the printer.
If you do it, please consider documenting the experience and results
(even if it doesn't work out) so others can learn.
---
James