On Fri, 04 Aug 2006 05:04:51 +0200, fenrir_co <
fenrir@...>
wrote:
>
> I should have posted the numbers, yes, I need the T060x series of
> chips from the C68/88/3800/4800/etc. I've sent you an e-mail. If
> anyone else has any from empty cartridges, let me know. I'm looking to
> keep one or two extra sets around just in case. Thanks!
>
I'm not sure you considered this, so here you go:
If you use manual reset chips you need to remove the cart from the printer
each time you refill, introducing air and requiring some waiting and
cleaning. If you never ever take the cart out you do not have this problem.
A workaround is to remove the chips from the carts, remove the small PCB
with the contacts, split off the ribbon connector, and mount the chips in
a more reasonable place than the head. I soldered them all together.
But in the end i got the automatic chips with the spongeless carts so i
put it all back for simplicity.
ST