--- In
Homebrew_PCBs@yahoogroups.com, Mike <k4gmh@...> wrote:
>
> Another approach I've successfully used for TT is
> to heat the PCB in an oven to ~300 F and then
> apply the TT material. Use an iron to further
> raise the temp of the board to get full
> transfer. The idea is to get the board almost to
> the proper temp,, apply the TT material and then
> finish raising the PCB to the proper temp. with the iron for a good
transfer.
That sounds easy. Except for one thing. How
do you align the TT material on the 300 degF PCB?