Sorry for typo I have uploaded the files.
----- Original Message ----
From: Volkan Sahin <
vsahin@...>
To:
Homebrew_PCBs@yahoogroups.comSent: Monday, May 29, 2006 4:56:01 PM
Subject: Re: [Homebrew_PCBs] First CNC drilled Epson Ink Jet printed double layer PCB results+solder resist
I have also tried to use ink as a solder resist. It is difficult to believe but it also acts as a solder resist. I have downloaded the result under
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/files/Volkan%20Epson%20Inkjet%20PCB/ I am satisfied with the results.
Steps of solder resist printing with Epson inkjet printer
1-Clean the etched PCB with Ajax
2-Roughly estimate the position of the printed image on tray and put PCB to this location and loosely fix it by Scotch.
3-Cover PCB with transparency and fix the transparency by Scotch.
5-Set ink color level to -15 for CX4200
6-Print your solder resist image on transparency
6-Now, using small PCB sticks align the pads of the PCB to the image on the transparency
7-Remove transparency
8-Reprint image on PCB
9-Dry the image and repeat item 8 two times with ink color level set to +10 for CX4200
10-Repeat the above process for the other layer.
11-Cure both sides
12-Remove copper oxide by Tarn-X or diluted HCL
Note: For solder resist you need to use negative image.
Cheers
Volkan
----- Original Message ----
From: Volkan Sahin <
vsahin@...>
To:
Homebrew_PCBs@yahoogroups.com Sent: Monday, May 29, 2006 1:37:42 AM
Subject: [Homebrew_PCBs] First CNC drilled Epson Ink Jet printed double layer PCB results
Hi All,
Finally I have completed my printer modifications and successfully printed double layer PCB.
[Non-text portions of this message have been removed]
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ SPONSORED LINKS
Electrical engineering degree online Electrical engineering degree Printed circuit board Electrical engineering Electrical engineering course Electrical engineering graduate school
YAHOO! GROUPS LINKS
Visit your group "Homebrew_PCBs" on the web.
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]