Alan,
I can't do those tricks 'cause I design my boards so that they can be
outsourced in the future. I want to design my board as it will be done in
'production', so if there are design anomalies I should detect them during
my DIY prototyping.
If I use unorthodox techniques of wrapping wires around the edge of PCBs and
such, that will not mimic 'exactly' how the production board will react.
I've switched to SMDs, I find them better, but they are not for everyone.
Those with bad eyes, shaky hands or serious sneezing problems won't be able
to use them.
I'm also considering through-hole plating. There are times when having my
'future magic CNC machine' punch eyelets into a PCB would make my life so
much easier. I think I would be happy with a manual system of placing the
eyelets and having the CNC pressure-stamp it into place. I am not doing
mass production, as long as the CNC can 'step through' the via positions and
let me press a STAMP button after I've placed an eyelet, I'd be extremely
happy.
Robert
:)
> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Alan King
> Envoyé : mai 9 2006 18:22
> À : Homebrew_PCBs@yahoogroups.com
> Objet : Re: [Homebrew_PCBs] Re: EDM of PCB
>
>
> Jumpers, components over traces, taking wires out to the
> edge of the
> board and soldering a wire around, take several to a single area and
> drill a larger hole and wrap wires around,. etc etc. There's
> a ton of
> ways to not use a lot of little holes. Once you get to the
> point that
> you start having to have a bunch of holes, you're almost out of the
> range of being effective vs having a prototype board made.. While it
> can be done, with the huge amount of time needed most would be better
> off simply buying that occasional board from a cheap prototype maker..
>
> While it is worth looking at or could be decent if you make
> a lot of
> boards, for most people's quick turn prototyping you can
> really get buy
> with almost no holes once you adapt your board design skills
> to the idea..
>
> Alan
>