Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

http://www.inksupply.com/c86_slc_refill.cfm

3. ... Next, remove the needle from the end of syringe and attach the bottom
fill adapter (MIS-BADPT). Draw out 1 cc of ink from the exit port to remove
any trapped air.


Fill from the top like any other cartridge and drain air from the bottom to
'prime' the cartridge.

Odd, they call it MIS-BADPT in that instruction page, but it is called
MIS-BADP in the accessory list?
http://www.inksupply.com/accessory.cfm
MIS-BADP BOTTOM FILL ADAPTER 1 $0.50

Robert
:)

> -----Message d'origine-----
> De : Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] De la part de Lez
> Envoyé : avril 30 2006 12:01
> À : Homebrew_PCBs@yahoogroups.com
> Objet : [Homebrew_PCBs] refilling spongeless
>

...

>
> Err, dont you just inject the ink into the cartridge ?
>