I haven't found a cheaper alternative to Pulsar transfer paper that gets
quality results.
I meant drum, not roller. I just slightly touched it with tweezers to get
some lint out of the roller and that did the job. It left miniscule
scratches in the finish and that was all it took. Live and learn.
Robert
:(
-----Message d'origine-----
De :
Homebrew_PCBs@yahoogroups.com [mailto:
Homebrew_PCBs@yahoogroups.com] De
la part de Stefan Trethan
Envoyé : avril 6 2006 13:34
À :
Homebrew_PCBs@yahoogroups.comObjet : Re: [Homebrew_PCBs] RE : Update on toner transfer
You can try to use a cheaper paper so it doesn't matter so much of you
waste more, i use half sheets too.
To stick a smaller piece down you can use paper tape or laser printer
labels, but this will always lead to increased paper thickness which means
less toner density.
If your drum was not damaged you could probably set the printer to
envelope printing or something to switch off the lights...
ST
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBsIf Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ Yahoo! Groups Links