Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

This is a PCB I've produced with JetStar inkjet film:

Files > LCDPUB > 18F2455.jpg

It looks like the process I'm using with this film is reliable and
repeatable. I don't waste a whole sheet of the film on a little board
like this, of course; I cut a small piece and stick it to a sheet of
ordinary A4 paper with a piece of masking tape, and put that in the
paper feeder.

The board is for experimenting with the USB function of the
PIC18F2455. It just has an LED for output. It has the usual USB
connector and a connector for the ICD 2 debugger/programmer.