I secured the LEDs in place with a little epoxy...
I finished the board last night and now moving onto finishing the
remainder of the wiring.
I have one question regarding the wiring of the switches, for the
Start / Stop / AUX - ON-OFF-(ON)Toggles the top and bottom tabs of the
switches and connected to together so we have a ON and mom ON for
those functions?
Thanks
Chris
--- In
ComputerVoltageSources@yahoogroups.com, "djbrow54" <davebr@...>
wrote:
>
> You have LEDs in the panel. How did you mount them? I used a small
> breadboard and then silicon RTV to the panel. Just curious.
>
> The panel is public so no issue there. As to the LCD, I put a command
> in there to change the power up message and store it in eeprom so you
> can customize that as well. Once the system is all together and
> programmed, the power up message is generally never seen since your
> program more than likely displays something anyway.
>
> Dave
>
>
> --- In ComputerVoltageSources@yahoogroups.com,
> "thealisonproject" <alison@> wrote:
> >
> > Hi Everyone
> >
> > All my parts arrived so I decided to throw a few pics as the
> building
> > goes forward.
> >
> > Note: this was my first FPE panel so I had to put a color in there.
> I
> > didn't think about it until afterwords but no disrespect to Dave
> Brown
> > for removing ModularSynthesis from the panel which he designed, he
> > will be represented on the LCD.
> >
> > http://thealisonproject.com/cvs.html
> >
> > Chris
> >
>