Dave, and others that may be interested. ExpressPCB offers ProtoPro
service. This is 4 boards for $179.00, which includes solder mask and
silk screening. That works out to about $45 per board. Size is 21
square inches per board max.
Dave, just how hard was your current board to work on? How big is it?
In your opinion, could some that does everything from MOTM to CGS
boards be able to build it in it's current configuration?
Larry T.
--- In
ComputerVoltageSources@yahoogroups.com, "djbrow54" <davebr@...>
wrote:
>
> The issue is ExpressPCB is very expensive for solder mask in small
> quantities. The setup fee is $233 so you have to order a lot of
> boards to cover this cost. The board needs to be larger so this cost
> would increase. Someone with PCB layout software needs to layout the
> board in a larger size with standard PCB output files. This larger
> size would also allow DIP versions of the DACs to be added so SMT
> could be avoided. My layout could be used as a starting base. I know
> there are people on this list that have PCB layout skills, software
> and experience.
>
> This project will only move forward if others volunteer. I've
> contributed all I can.
>
> Dave
>
> --- In ComputerVoltageSources@yahoogroups.com, "Larry T." <larry@>
> wrote:
> > Don't get me wrong. I know that this is a volunteer effort.
>