I just put 4 fpd designs in the front panel folder. I am undecided on
the number of calibrated inputs so I tried different layouts with
none, 4, or 8. I also changed the design to use Piher PC controls
since there are so many. The only change is the mounting hole is
smaller.
Comments and suggestions welcomed.
Dave
--- In
ComputerVoltageSources@yahoogroups.com, "djbrow54" <davebr@...>
wrote:
>
> I got it all to fit in a 5U x 5U panel. I uploaded a photo to my
> photo folder. The display PCB is much larger than the display area
so
> I had to move some items around.
>
> Some details ...
>
> The MIDI connectors are Mouser 16HR655. Very nice.
>
> The LEDs are 3 mm
>
> The switches are the NKK 1/4" flat handle toggles. I generally use
> momentary but this time I think I'll use (ON)-OFF-ON so I can use
them
> as mode switches.
>
> The jack spacing side-to-side is narrower than MOTM for everything
to
> fit. It is close, though.
>
> The knobs are the 0.75" diameter. Same as on my PSIM and the Encore
> UEG.
>
> The LCD is centered vertically the same as the MOTM-650.
>
> Other thoughts ...
>
> I hope the start / stop are general purpose inputs AND OUTPUTS.
There
> is no reason to limit these to inputs. I think start, stop, and aux
> should all be general digital I/O. I added switches to each.
>
> Dave
>