April 2015 Archives by author
Starting: Wed Apr 1 01:15:56 CEST 2015
Ending: Thu Apr 30 21:51:52 CEST 2015
Messages: 234
- [sdiy] testing...testing...
ASSI
- [sdiy] 4051 spikes
Florian Anwander
- [sdiy] midi and DIN sync in the one connector
Florian Anwander
- [sdiy] The API Lunchbox format
Florian Anwander
- [sdiy] Probes and Smoke
Florian Anwander
- [sdiy] Changing 15v power to 12v?
Tom Arnold
- [sdiy] Changing 15v power to 12v?
Tom Arnold
- [sdiy] Changing 15v power to 12v?
Tom Arnold
- [sdiy] Hal Chamberlin
Tom Arnold
- [sdiy] <OT> Job status, plastic repair
Tom Arnold
- [sdiy] midi and DIN sync in the one connector
Tom Arnold
- [sdiy] Chamberlin
BrightBoy
- [sdiy] 4051 spikes
Dave Brown
- [sdiy] OT:Running stand alone autotune
Tom Bugs
- [sdiy] Sallen Key caps
Tom Bugs
- [sdiy] The API Lunchbox format
Tom Bugs
- [sdiy] backwards pots. Whats the deal?
Richie Burnett
- [sdiy] Arpeggiator1 / Arduino UNO
Richie Burnett
- [sdiy] OT:Running stand alone autotune
Richie Burnett
- [sdiy] 36dB VCF output drop while increasing emphases
Richie Burnett
- [sdiy] Sallen Key caps
Richie Burnett
- [sdiy] 4051 spikes
Richie Burnett
- [sdiy] 4051 spikes
Richie Burnett
- [sdiy] midi and DIN sync in the one connector
Richie Burnett
- [sdiy] midi and DIN sync in the one connector
Richie Burnett
- [sdiy] Probes and Smoke
Richie Burnett
- [sdiy] Vemia
Michael E Caloroso
- [sdiy] Chamberlin
Michael E Caloroso
- [sdiy] how to tell metal film resistors?
Michael E Caloroso
- [sdiy] 4051 spikes
Michael E Caloroso
- [sdiy] 4051 spikes
ChristianH
- [sdiy] Rotary switch 6 positions 60deg throw..
The Old Crow
- [sdiy] 4051 spikes
The Old Crow
- [sdiy] Front panel and PCB design tactics
Ingo Debus
- [sdiy] Minimoog tuning questions
Julien Delgoulet
- [sdiy] Minimoog tuning questions
Julien Delgoulet
- [sdiy] Probes and Smoke
Jean-Pierre Desrochers
- [sdiy] Probes and Smoke
Jean-Pierre Desrochers
- [sdiy] 36dB VCF output drop while increasing emphases
David G Dixon
- [sdiy] 36dB VCF output drop while increasing emphases
David G Dixon
- [sdiy] 36dB VCF output drop while increasing emphases
David G Dixon
- [sdiy] Sallen Key caps
David G Dixon
- [sdiy] Front panel design philosophies
David G Dixon
- [sdiy] testing...testing...
Eric Frampton
- [sdiy] Minimoog tuning questions
Eric Frampton
- [sdiy] WTB: a couple dozen CEM3340's and 3310's
Eric Frampton
- [sdiy] OT:Running stand alone autotune
Joe Frey
- [sdiy] OT:Running stand alone autotune
Joe Frey
- [sdiy] 36dB VCF output drop while increasing emphases
Ian Fritz
- [sdiy] 36dB VCF output drop while increasing emphases
Ian Fritz
- [sdiy] 36dB VCF output drop while increasing emphases
Olivier Gillet
- [sdiy] Arduino schem - diode in series with R at reset pin?
Gordonjcp
- [sdiy] 4051 spikes
Gordonjcp
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] 36dB VCF output drop while increasing emphases
Harald
- [sdiy] Front panel design philosophies
Phillip Harbison
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Justin Herrmann
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Justin Herrmann
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Justin Herrmann
- [sdiy] Front panel design philosophies
Matthias Herrmann
- [sdiy] Rotary switch 6 positions 60deg throw..
Colin Hinz
- [sdiy] testing...testing...
Colin Hinz
- [sdiy] Front panel and PCB design tactics
Colin Hinz
- [sdiy] 36dB VCF output drop while increasing emphases
Adam Inglis
- [sdiy] <OT> Job status, plastic repair
Adam Inglis
- [sdiy] Front panel design philosophies
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] midi and DIN sync in the one connector
Adam Inglis
- [sdiy] Vemia
Jack Jackson
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Jack Jackson
- [sdiy] Front panel and PCB design tactics
Byron G. Jacquot
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Arpeggiator1 / Arduino UNO
Rick Jansen
- [sdiy] Electro Notes
Rick Jansen
- [sdiy] Synth DIY UK 2015 - reminder
Neil Johnson
- [sdiy] backwards pots. Whats the deal?
Neil Johnson
- [sdiy] backwards pots. Whats the deal?
Neil Johnson
- [sdiy] At long last...
Neil Johnson
- [sdiy] At long last...
Neil Johnson
- [sdiy] backwards pots. Whats the deal?
Neil Johnson
- [sdiy] DAC/REF Data sheet / Dev board R question
Neil Johnson
- [sdiy] how to tell metal film resistors?
Neil Johnson
- [sdiy] how to tell metal film resistors?
Neil Johnson
- [sdiy] how to tell metal film resistors?
Neil Johnson
- [sdiy] Probes and Smoke
Neil Johnson
- [sdiy] testing...testing...
Nicholas Keller
- [sdiy] testing...testing...
Nathanael King
- [sdiy] testing...testing...
Nathanael King
- [sdiy] testing...testing...
Nathanael King
- [sdiy] testing...testing...
Barry Klein
- [sdiy] <OT> Job status, plastic repair
Barry Klein
- [sdiy] <OT> Job status, plastic repair
Barry Klein
- [sdiy] <OT> Job status, plastic repair
Barry Klein
- [sdiy] At long last...
Lanterman, Aaron
- [sdiy] Chamberlin
Lanterman, Aaron
- [sdiy] Fun with Rhodes Chroma VCO
Lanterman, Aaron
- [sdiy] Front panel design philosophies
Lanterman, Aaron
- [sdiy] Front panel design philosophies
Lanterman, Aaron
- [sdiy] First working PCB from this semester's synth class
Lanterman, Aaron
- [sdiy] The API Lunchbox format
Lanterman, Aaron
- [sdiy] Arpeggiator1 / Arduino UNO
MTG
- [sdiy] MonoSynth Note Priority over MIDI
MTG
- [sdiy] Front panel design philosophies
MTG
- [sdiy] 4051 spikes
MTG
- [sdiy] The API Lunchbox format
MTG
- [sdiy] Probes and Smoke
Maarten
- [sdiy] Probes and Smoke
Maarten
- [sdiy] Probes and Smoke
Maarten
- [sdiy] Probes and Smoke
Maarten
- [sdiy] Crowminius
Paul Maddox
- [sdiy] 36dB VCF output drop while increasing emphases
Chris McDowell
- [sdiy] how to tell metal film resistors?
Quincas Moreira
- [sdiy] Source for Electric Druid TapLFO?
David Moylan
- [sdiy] Arpeggiator1 / Arduino UNO
Nantonos
- [sdiy] Arpeggiator1 / Arduino UNO
Nantonos
- [sdiy] Arpeggiator1 / Arduino UNO
Nantonos
- [sdiy] Front panel design philosophies
Nantonos
- [sdiy] DAC/REF Data sheet / Dev board R question
Nantonos
- [sdiy] testing...testing...
Needham, Alan
- [sdiy] Solder resist/mask?
Justin Owen
- [sdiy] Arduino schem - diode in series with R at reset pin?
Justin Owen
- [sdiy] Sallen Key caps
Justin Owen
- [sdiy] Sallen Key caps
Justin Owen
- [sdiy] DAC/REF Data sheet / Dev board R question
Justin Owen
- [sdiy] DAC/REF Data sheet / Dev board R question
Justin Owen
- [sdiy] Vemia
Paul Perry
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Paul Perry
- [sdiy] 4051 spikes
Paul Perry
- [sdiy] Front panel design philosophies
Paul Perry
- [sdiy] DAC/REF Data sheet / Dev board R question
Paul Perry
- [sdiy] how to tell metal film resistors?
Paul Perry
- [sdiy] Front panel design philosophies
Paul Perry
- [sdiy] Arduino schem - diode in series with R at reset pin?
Ullrich Peter
- [sdiy] Probes and Smoke
Ullrich Peter
- [sdiy] Probes and Smoke
Ullrich Peter
- [sdiy] Front panel design philosophies
Stewart Pye
- [sdiy] 36dB VCF output drop while increasing emphases
Quincas
- [sdiy] how to tell metal film resistors?
Quincas
- [sdiy] Op Amp LED driver / Current Source problem/solution
Tim Ressel
- [sdiy] Chamberlin
Tim Ressel
- [sdiy] The API Lunchbox format
Mattias Rickardsson
- [sdiy] Arduino schem - diode in series with R at reset pin?
Ove Ridé
- [sdiy] At long last...
Ben Riggs
- [sdiy] 36dB VCF output drop while increasing emphases
René Schmitz
- [sdiy] how to tell metal film resistors?
René Schmitz
- [sdiy] where to get jacks like the ones on the Disting
Paul Schreiber
- [sdiy] Changing 15v power to 12v?
Edward Schultheis
- [sdiy] Changing 15v power to 12v?
Edward Schultheis
- [sdiy] 4051 spikes
Jay Schwichtenberg
- [sdiy] Synth DIY UK 2015 - reminder
Terry Shultz
- [sdiy] 36dB VCF output drop while increasing emphases
Andrew Simper
- [sdiy] At long last...
Dan Snazelle
- [sdiy] At long last...
Dan Snazelle
- [sdiy] At long last...
Dan Snazelle
- [sdiy] Chamberlin
Dan Snazelle
- [sdiy] testing...testing...
Roman Sowa
- [sdiy] Arpeggiator1 / Arduino UNO
Roman Sowa
- [sdiy] Arpeggiator1 / Arduino UNO
Roman Sowa
- [sdiy] Arpeggiator1 / Arduino UNO
Roman Sowa
- [sdiy] Chamberlin
Roman Sowa
- [sdiy] Sallen Key caps
Roman Sowa
- [sdiy] Sallen Key caps
Roman Sowa
- [sdiy] how to tell metal film resistors?
Roman Sowa
- [sdiy] how to tell metal film resistors?
Roman Sowa
- [sdiy] midi and DIN sync in the one connector
Roman Sowa
- [sdiy] The API Lunchbox format
Roman Sowa
- [sdiy] The API Lunchbox format
Roman Sowa
- [sdiy] testing...testing...
Rob Spencer
- [sdiy] Electro Notes
Rob Spencer
- [sdiy] WTB: a couple dozen CEM3340's and 3310's
Doug Terrebonne
- [sdiy] backwards pots. Whats the deal?
Donald Tillman
- [sdiy] backwards pots. Whats the deal?
Donald Tillman
- [sdiy] backwards pots. Whats the deal?
Donald Tillman
- [sdiy] 36dB VCF output drop while increasing emphases
Carsten Toensmann
- [sdiy] Front panel design philosophies
Declare Update
- [sdiy] Front panel and PCB design tactics
Declare Update
- [sdiy] The API Lunchbox format
Jarno Verhoeven at ziggo.nl
- [sdiy] Arpeggiator1 / Arduino UNO
Jacob Watters
- [sdiy] At long last...
Andy Wilson
- [sdiy] backwards pots. Whats the deal?
Tom Wiltshire
- [sdiy] testing...testing...
Tom Wiltshire
- [sdiy] Arpeggiator1 / Arduino UNO
Tom Wiltshire
- [sdiy] At long last...
Michael Zacherl
- [sdiy] At long last, 2nd ed vs 3rd ed comparison.
Michael Zacherl
- [sdiy] how to tell metal film resistors?
Michael Zacherl
- [sdiy] how to tell metal film resistors?
Michael Zacherl
- [sdiy] how to tell metal film resistors?
Michael Zacherl
- [sdiy] how to tell metal film resistors?
Michael Zacherl
- [sdiy] Front panel design philosophies
Michael Zacherl
- [sdiy] Changing 15v power to 12v?
mskala at ansuz.sooke.bc.ca
- [sdiy] Front panel design philosophies
mskala at ansuz.sooke.bc.ca
- [sdiy] Front panel design philosophies
mskala at ansuz.sooke.bc.ca
- [sdiy] Front panel design philosophies
mskala at ansuz.sooke.bc.ca
- [sdiy] 4051 spikes
florian anwander
- [sdiy] backwards pots. Whats the deal?
rsdio at audiobanshee.com
- [sdiy] MonoSynth Note Priority over MIDI
rsdio at audiobanshee.com
- [sdiy] Chamberlin
rsdio at audiobanshee.com
- [sdiy] Sallen Key caps
rsdio at audiobanshee.com
- [sdiy] DAC/REF Data sheet / Dev board R question
rsdio at audiobanshee.com
- [sdiy] Front panel design philosophies
rsdio at audiobanshee.com
- [sdiy] DAC/REF Data sheet / Dev board R question
rsdio at audiobanshee.com
- [sdiy] Front panel and PCB design tactics
rsdio at audiobanshee.com
- [sdiy] Front panel design philosophies
rsdio at audiobanshee.com
- [sdiy] Front panel and PCB design tactics
rsdio at audiobanshee.com
- [sdiy] Front panel and PCB design tactics
rsdio at audiobanshee.com
- [sdiy] 4051 spikes
rsdio at audiobanshee.com
- [sdiy] midi and DIN sync in the one connector
rsdio at audiobanshee.com
- [sdiy] Front panel design philosophies
rsdio at audiobanshee.com
- [sdiy] where to get jacks like the ones on the Disting
henry birdseye
- [sdiy] where to get jacks like the ones on the Disting
blacet at blacet.com
- [sdiy] 4051 spikes
m brandenberg
- [sdiy] 4051 spikes
m brandenberg
- [sdiy] 4051 spikes
m brandenberg
- [sdiy] midi and DIN sync in the one connector
foRUMS 4 punkdISCO
- [sdiy] midi and DIN sync in the one connector
foRUMS 4 punkdISCO
- [sdiy] Chamberlin
synth
- [sdiy] Changing 15v power to 12v?
synth
- [sdiy] backwards pots. Whats the deal?
mark verbos
- [sdiy] backwards pots. Whats the deal?
mark verbos
Last message date:
Thu Apr 30 21:51:52 CEST 2015
Archived on: Fri Apr 1 13:41:08 CEST 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).