One voice is less *bright* ....!?!
2006-05-15 by Quazimodo
Hi guys, I m shortly going to renew my power supply caps, been meaning to do that for some time now.... And also do the tuning procedure. Many thanks for all
Messages
Browse messages
Page 79 of 95 · 4738 messages matched
Re: [yamahacs80] Re: CS-70M
2006-05-14 by laurie
What I do like is the memory from the entire panel is stored in each oscillator bank and then arranged based on mix 1 parameters....this is where multi timbral
Re: CS-70M
2006-05-14 by jiliora
Hi used to have one too (but my father still has one, so i can use it anytime ..) i was lucky enough to play both alternately to compare, and no doubt that it
Re: [yamahacs80] CS-70M
2006-05-14 by laurie
I used to have one....It was the last analog synth (Digitally controlled)Yamaha made I believe.....It was an attempt for a prophet type memory system using
CS-70M
2006-05-14 by Wayne Griffin
I was wondering if there are any other CS-70M users in the group. I’ve heard little mention of the CS-70M here; I know they are somewhat obscure. I have one
Re: [yamahacs80] TKC Caps
2006-05-12 by The Old Crow
I suspect they are 0.1 microfarads. Crow /**/
TKC Caps
2006-05-12 by system_700
Can anyone tell me what value the caps are on this board? http://launch.ph.groups.yahoo.com/group/yamahacs80/photos/view/de61?b=3
Re: The usage of String 1 and String 2 presets.
2006-05-10 by jiliora
Hi there is way to use strings 1&2 i like i add the tremolo effect (max depth and low speed), put voice 1 on 8 and voice 2 on 16 , and remove few frequencies
Help on PSU capacitors
2006-05-10 by maxferfranc
Hi all Please go to the files section of the group s site , look at the caps.jpg file and tell me: are the 6800uF capacitors placed well? Thx for any
New file uploaded to yamahacs80
2006-05-10 by yamahacs80@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the yamahacs80 group. File : /caps.jpg
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-10 by Max Fazio
Err...yes (blushes) ;) M ... From: Tommy Priakos To: Sent: Wednesday, May 10, 2006 8:55 PM Subject: Re:
Some questions about a CS-50
2006-05-10 by sebastian_cordoves
Hi all: As stated before I m in the way of use a PAiA MIDI2CV8 to control via CV the 4 voices of my CS-50, because the KAS is dead. Actually I m controlling 1
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-10 by Tommy Priakos
I think Max was really meaning 3 and 4 (?). Mert Topel wrote: How do you combine string 2 with string 4? ... From: Max Fazio To:
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-10 by Mert Topel
How do you combine srting 2 with string 4? ... From: Max Fazio To: yamahacs80@yahoogroups.com Sent: Wednesday, May 10, 2006 12:18 AM Subject: Re: [yamahacs80]
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-10 by Tommy Priakos
I use String 3 and then refer to the manual to replicate String 3 with one of the Memory buttons or Panel II, so I have virtually the same sound on both I and
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-10 by Tim Siefkes
I don t generally use String 1 and String 2 together. I always end up with a diagonal pattern, String 1 w/String 4, or most often for me, String 3 w/String 2.
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-09 by laurie
I like the sounds of these strings......They are not as brassy as the old elka rhapsody strings.....they work really well when detuned and with the chorus on
Re: [yamahacs80] Chorus and Tremolo on/off rocker switch question.
2006-05-09 by laurie
the switch engages the chorus amps(modulated delays) in a braked position(parked leslie effect)left and right outputs are mono out of phase with each other...
Re: [yamahacs80] Chorus and Tremolo on/off rocker switch question.
2006-05-09 by Max Fazio
What I know: to switch the on button does arm the circuitry of the chorus, id est it applies a fixed 6ms delay and a phasing effect courtesy of a loop
Re: [yamahacs80] The usage of String 1 and String 2 presets.
2006-05-09 by Max Fazio
Very often is the combination strings2-strings4 to be used, sometimes strings2 is tuned1octave upper ;) M ... From: Mert Topel To:
Chorus and Tremolo on/off rocker switch question.
2006-05-09 by Mert Topel
The on/off switch by the chorus and tremolo rocker switches applies a certain kind of effect even when the dedicated tremolo and chorus switches are turned
The usage of String 1 and String 2 presets.
2006-05-09 by Mert Topel
My CS-80 ownership just dates back to one month only. Although I am immensely impressed by the CS-80 s musicality, there is one point that still remains quite
Re: CS80 voice cards
2006-05-08 by blchrr@homecall.co.uk
Hi Laurie, OK, no problem, ill mail you back next monday. Appologies to the rest of this list that last email was supposed to be sent direct not to the list.
Re: [yamahacs80] Re: CS80 voice cards
2006-05-08 by laurie
I will know exactly where I stand financially on Monday the 15th.....I d love to say yes right now, but I want to be sure I have all expences
Re: CS80 voice cards
2006-05-08 by blchrr@homecall.co.uk
Hi laurie, Just thought id email you, i still have 2x CS80 voice cards for sale, you asked me to contact you in a few weeks when you had a chance to raise some
Re: [yamahacs80] CS80 tuning procedure....
2006-05-05 by laurie
maybe harmfull with a screwdriver...but .I have never had a problem touching the back of the 2 foot pot with my finger.....my body acts as a resistor in
PSU white caps- replacement?
2006-05-05 by Max Fazio
Hi guys Anyone can address me on the capacitors types and codes to replace : 1. the white caps into the PSU 2. the caps on the -6.5/+8.5V , agin on PSU. Can
Re: [yamahacs80] CS80 tuning procedure....
2006-05-05 by Wavecomputer360
I´ve been told that touching the pcbs would probably the most lethal thing to do; any CMOS components might get fried by static electricity, even if you´re
Re: [yamahacs80] CS80 tuning procedure....
2006-05-05 by David Rogoff
Laurie, What you wrote is what the service manual says. However, as the original question said, there s an opinion, specifically on Crow s www.cs80.com
Re: [yamahacs80] CS80 tuning procedure....
2006-05-05 by laurie
touch the back side of the boards with your finger in behind the 2 foot (blue)trimpot....you will hear a fluctuation in pitch for the card on the key you
Re: [yamahacs80] CS80 tuning procedure....
2006-05-04 by David Rogoff
... Piece of cake! First, use a non-conductive screwdriver/adjustment tool. They re very cheap. Also, a wrist ground-strap is a good idea and also very
CS80 tuning procedure....
2006-05-04 by Quazimodo
Hi folks, OK I m gonna tune her again, it s about time.... I did it a few years ago and at the time I did the touching-the screwdriver thing to hear which
Re: CS-60 Ebay parts
2006-05-03 by blchrr@homecall.co.uk
Hi, Thats me. It was actually a CS60 power supply dont know if it would work in a Cs80, but its sold now anyway, thanks! All parts appear to be sold, all i
many thanks to JH, David, Laurie
2006-05-03 by Max Fazio
Thx so much guys, you helped me with a not so easy problem! Again, thanks a lot! BTW: is there anywhere where I can find the data sheet for the iG00150 chip?
Re: iG00150 datasheet-where??
2006-05-03 by The Old Crow
Hi Max, The only data I have on the IG00150 is a description of how it is similar to the VCO-III (IG00153) and how it has an internal expo converter and sine
Re: [yamahacs80] CS-80 PSU capacitors - data sheets . Help please!!!!!
2006-05-02 by laurie
there is a guy on this list who is selling parts from a cs80 on Ebay....last time I looked the psu was still for sale..... ... Music sampler
CS-80 PSU capacitors - data sheets . Help please!!!!!
2006-05-02 by Max Fazio
Hi all I need urgent informations. I need to know what components should I need to replace the big 5600uF/40V capacitors and the white capacitors on the PSU
Re: KSR mods
2006-05-02 by oasysfan2
Here s a short UK excerpt of CS-80 strings that I think sound great. Listen to the independence of the lines, made possible by the CS-80 s poly aftertouch:
strings / KSR unison
2006-05-02 by erikfromhere
Well, about the strings: You can make good strings, but you have to use 2 channels with PWM and slight detune. On a OB or Prophet, you will always use 2 vco s
Re: [yamahacs80] KSR mods
2006-05-02 by laurie
mooo.oo..ouch...dat hurts.....whattid I dooto you??? Milk me...eat my young....I deserve some respect here moooo..... ... Music sampler Unit
Re: [yamahacs80] Re: KSR Pics
2006-05-01 by The Old Crow
The VCAs you can make from a 13600/13700 in pairs. They re just OTAs with an expo pair attached and no I/V converter. In fact, the expo pair is not needed
RE: [yamahacs80] Re: KSR mods
2006-05-01 by Tommy Priakos
Amazing, this just illustrates a creation is never finished. Can t wait to hear the sonic examples. Tommy kent spong wrote: It is
RE: [yamahacs80] Re: KSR mods
2006-05-01 by kent spong
It is based on the PH-3 Rob. As you say it does have four phase stages, but I found 4, 8, and 12 to be enough. In fact any Boss pedal can be fitted, and as
RE: [yamahacs80] KSR mods
2006-05-01 by kent spong
I will record one for you tomorrow. It s a shame that it was not ready when I did the KSR demo for RLmusic s site.
Re: KSR mods
2006-05-01 by blchrr@homecall.co.uk
Kent, Out of interest what model Boss pedal did you use for the phaser in your CS80 mods, was it a PH-3? You mentioned it had three modes, the PH-2 had two
RE: [yamahacs80] KSR mods
2006-05-01 by Tommy Priakos
Udderly Diabolical! Do you have a wav file of that? (not the pelvis shattering, but of the glide?) kent spong wrote: ... Yahoo!
RE: [yamahacs80] KSR mods
2006-05-01 by kent spong
Hi again, I do retolex the 80 s myself but without removing the insides, thank god :) You are right about the string sounds on the 80 though. This is why
KSR mods
2006-05-01 by erikfromhere
Hi Kent, thanks for the explenation. 64 vca-ic s, that s a lot of rare ic s. I thought you would generate the extra lfo s digitally ;-) Personally, I don t
KSR mods
2006-05-01 by erikfromhere
Hi Kent, thanks for the explenation. 64 vca-ic s, that s a lot of rare ic s. I thought you would generate the extra lfo s digitally ;-) Personally, I don t
RE: [yamahacs80] Re: KSR Pics
2006-05-01 by kent spong
Hi Erik, Yes that s right. The 16 IG00150 VCO s are for the VCO, VCF and VCA of the LFO section and are also controlled by the after touch too. The only down