Re: [yamahacs80] Hi / group activity
2015-10-30 by laurie
I have an issue with my CS80.... I did a upgrade to the newer VCO chips about 20 years ago... and ordered 2 M boards from overseas with what I believe is the
Messages
Browse messages
Page 7 of 95 · 4740 messages matched
Hi / group activity
2015-10-30 by david@...
Hi all. I know the group has been pretty sleepy lately. I m not worried since everyone is busy and activity always waxes and wanes. I hope to be posting a
Re: Mono Modification
2015-09-29 by Mattias Rickardsson
Hi Florian, ... Aha, I see, sorry - I thought you were referring to pitch adjustment when you said tuning. Agreed, for envelope time adjustment my method would
Re: [yamahacs80] Re: Mono Modification
2015-09-28 by Anwander, Florian
Hello Mattias my request is not about unisono because of its sound. I d need it for the adjustment procedure. I would add a switch to the gate lines, so I
Re: Mono Modification
2015-09-28 by Mattias Rickardsson
Just set the envelopes to a long release time, and press the same key 4 times. The CS voice allocation picks new voices each time, an the tails of your four
Mono Modification
2015-09-27 by Florian Anwander
While restoring this CS50 I thought, that a mono-unisono mode would be very helpful for tuning. So I am looking for a description of that modification
Re: [yamahacs80] CS60 bolts?
2015-09-24 by Anwander, Florian
Hello Rob The group settings seem to forbid attachments. You may either upload the picture to the photo section or send it me. I think I can identify them, as
CS60 bolts? (link)
2015-09-24 by blchrr@...
Hmm filter removed my pic, well heres a link to the pic: http://postimg.org/image/xgxdykg7t/ Cheers
CS60 bolts?
2015-09-24 by blchrr@...
Hey group, Ive dug up some bolts that i think are from the cs60? (hold the top lid down and screw in from the bottom) I didnt want to send them out if they are
Re: WTB: Yamaha CS-50/60(/80?) screws for panel and keyboard mounting
2015-09-23 by blchrr@...
Hi Florian, Sorry i havent forgotten about this, im sure i have these and you can have them free of charge, just cover the postage. I just need to go dig them
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-20 by Tim Conniff
Actually, I sent Kent proof of that privately, because I would want to know that if someone had beengetting that much from something I had built. It is in
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-20 by Phil a
... possibly a mistake, too. but it WAS in print so I didn t investigate. Very likely indeed as RL music does seem to like inflated figures :) Phil On Thu, Sep
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-17 by Tim Conniff
Kent, I will take that statement out of the e-bay listing. I don t want to mislead anyone.Thanks for calling my attention to this. Tim On Tuesday, September
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-17 by Tim Conniff
there must be a typo in RL s site. it was there. I thought it was possibly a mistake, too. but it WAS in print so I didn t investigate.In any event, what I
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-15 by Kent spong
I would love to charge $1200 for my dynamic unison mod. Very interested to know where you got that figure from actually. My price is £200 built and fitted
Re: [yamahacs80] Re: WTB: Yamaha CS-50/60(/80?) screws for panel and keyboard mounting
2015-09-15 by Anwander, Florian
Hello Rob, that would be great. Florian
Re: WTB: Yamaha CS-50/60(/80?) screws for panel and keyboard mounting
2015-09-15 by blchrr@...
I think i may have these Florian, let me have a look and ill get back to you
WTB: Yamaha CS-50/60(/80?) screws for panel and keyboard mounting
2015-09-15 by Anwander, Florian
Hello I got hold of an CS-50 in a quite uncared state. As first thing, I am searching for the two pairs of long screws, which hold the panel and the
Re: [yamahacs80] Re: oops, there's an error in my last message...
2015-09-15 by Tim Conniff
True but won t ever happen @ a sane price point like $199. Kent charges well over $1200 USD for the same functionality I offer. To accomplish what you re
Re: oops, there's an error in my last message...
2015-09-15 by synthparts@...
Is the mod always in the dynamic voice allocation mode? I used to have a CS60 with a mod with switches to select normal, 2-voices per key, 4-voices per key,
oops, there's an error in my last message...
2015-09-15 by tconno@...
Somehow, my posting here calls the mod a sync mod, when in fact it is only a cascading unison mod. Sorry if that confused anyone.
Re: [yamahacs80] BY now many of you have probably seen....
2015-09-15 by Tim Conniff
... the description addendum says it is a diy modification, I provide the finished product, you install it, with or without soldering, ....it is available
Re: BY now many of you have probably seen....
2015-09-15 by synthparts@...
Hi Tim, I don t quite understand what the auction is for. Would I be buying an actual complete, tested board that is essentially plug and play? Sounds more
BY now many of you have probably seen....
2015-09-13 by tconno@...
I have formed a CAD designed board to accomplish offering a sync mod for the CS s... yes, all 3 of the 50,60 &80. It s listed on e-bay, but thanks to millions
Aw: Re: [yamahacs80] Re: CS 50 due for overhaul: Any pointers?
2015-07-25 by Stephen Parsick
Thank you for all your responses, much appreciated. Apparently, my messages make it to the list again. Thanks, David! Stephen Gesendet: Donnerstag, 23. Juli
Re: [yamahacs80] Re: CS 50 due for overhaul: Any pointers?
2015-07-23 by Rikard Latvala
I did a big overhaul of a CS-50 including: Change of all CMOS. Recap of all Caps (ceramics, mylars, Polystyrene, tantalum and aluminium electrolytics changed
Re: CS 50 due for overhaul: Any pointers?
2015-07-21 by blatnik_michael@...
hi, maybe this page is of interest, some good hints for repair there. http://www.cs80.com/ http://www.cs80.com/ my cs60 is still working perfect, but i´m also
Two things...
2015-07-19 by noddyspuncture@...
Hi folks, Long time no posting on here... but I thought I d return to ask a question and also share an idea.... I have recently revisited a duff voice card in
CS 50 due for overhaul: Any pointers?
2015-07-15 by Stephen Parsick
Hi all, I have finally managed to talk my tech into having a go at my CS 50 -- any things that require particular attention or that should be looked at? My 50
Re: [yamahacs80] Yamaha CS60 Repair
2015-07-15 by Michael Blatnik
hi david, thank you very much! byemichael David Rogoff david@therogoffs.com [yamahacs80] schrieb am 19:15 Dienstag, 14.Juli
Re: [yamahacs80] Yamaha reface?
2015-07-15 by synthparts@...
It s not even a CS-5 replacement... Doug synthparts.com
Re: [yamahacs80] Yamaha CS60 Repair
2015-07-14 by David Rogoff
Hey Michael. Congrats on getting the CS60! The sub-osc problem should be pretty easy to trace if you are comfortable opening it up and can read a schematic.
Yamaha CS60 Repair
2015-07-14 by blatnik_michael@...
Hi, i got an CS60 in wonderful condition 2 weeks ago, of course im very very happy! :) But i found a problem, one of the voicecards (the 7th) doesnt respond to
Re: [yamahacs80] Yamaha reface?
2015-07-09 by david@...
Hi Daniel. Thanks for the link to the manuals. I guess these keyboards could be fun if cheap enough. However, it has zero in common with the classic CS
Re: [yamahacs80] Yamaha reface?
2015-07-09 by Daniel Forró
Manuals can be downloaded here:
Re: Forum waking up / CSxx mod development platform
2015-07-08 by tpriakos@...
I know! And not once, but in other reface videos/livestreams Nate Tschetter keeps saying C.S. stood for control synth : ( I hope he is told Combo is the
Re: Re: [yamahacs80] Yamaha reface?
2015-07-08 by laurie
the only water they tested was riddled with kool aid I cant believe they said the CS series stood for control synth....talk about not knowing your greatest
Re: [yamahacs80] Yamaha reface?
2015-07-08 by NIgel Cruickshank
They could be testing the water, working up to something bigà.
Re: [yamahacs80] Yamaha reface?
2015-07-08 by Timothy Siefkes
That�s no CS-80 replacement... Sorry, Yamaha.
Re: [yamahacs80] Yamaha reface?
2015-07-08 by robert hall
oh no - more cheapo synths.
Re: [yamahacs80] Yamaha reface?
2015-07-08 by Daniel Forró
Yes, but lot of features are missing, to me it s just incomparable, it s just a toy. Exactly that important performing aspect was omitted, all that what makes
Re: [yamahacs80] Yamaha reface?
2015-07-08 by Tommy Priakos
I am going to reserve judgment on these products. Back when I first played a (brand new) CS-80 at a music store I had no idea of its potential until I heard
Re: [yamahacs80] Yamaha reface?
2015-07-08 by Daniel Forró
It will come on the market in September, each piece for 799 USD. I really wonder who would buy it. This trend of combination of toy (small range mini keys
Re: [yamahacs80] Yamaha reface?
2015-07-07 by g.poropat@...
Yamaha site is not responding to me too, but I could see it on other sites: The Synthesizer Sympathizer: Full Yamaha Reface Line Spec Leak - Digital
Re: [yamahacs80] Yamaha reface?
2015-07-07 by David Rogoff
I just got website not responding Sent from my iPhone
Re: [yamahacs80] Yamaha reface?
2015-07-07 by g.poropat@...
Looks like Joke :-)
Re: [yamahacs80] Yamaha reface?
2015-07-07 by david@...
About 2 hours until the big reveal! https://yamahasynth.com
Re: [yamahacs80] Re: Yamaha reface?
2015-06-22 by Tommy Priakos
You re right about the DX1 - the KX midi board did not have poly aftertouch...all these years I thought it did have. Hmmm. Sent from my iPhone ... You re right
Re: Re: [yamahacs80] Re: Yamaha reface?
2015-06-22 by laurie
I thought the DX1 was the last ... 1984, no polyphonic aftertouch. Daniel Forro On Jun 22, 2015, at 10:11 PM, Tommy Priakos tpriakos@yahoo.com [yamahacs80]
Re: [yamahacs80] Re: Yamaha reface?
2015-06-22 by Daniel Forró
1984, no polyphonic aftertouch. Daniel Forro On Jun 22, 2015, at 10:11 PM, Tommy Priakos tpriakos@yahoo.com