Re: [yamahacs80] Re: BA617
2010-07-09 by Max Fazio
Thx Gavin but I couldn t locate the chip on the site you mentioned! Is the chip s ID the one you wrote, as a whole? M ... From: gavin curtis To:
Messages
Browse messages
Page 36 of 95 · 4739 messages matched
Re: BA617
2010-07-09 by zenithaudio2003
There is plenty of those in my house and in circulation you just have to look in the right places .( http://www.flickr.com/photos/31603983@N05/4776305351/ ) if
Re: [yamahacs80] Re: BA617
2010-07-09 by gavin curtis
If this IC is bad, it wouldn t be too difficult to find an alternative solution. ModuleMaster/Circuit Solutions Inc. 2006 S Main Moscow, ID 83843, USA
Re: BA617
2010-07-09 by zenithaudio2003
hi , i thinks this is all we got http://www.flickr.com/photos/31603983@N05/
BA617
2010-07-08 by Max Fazio
Hi all As on object: anybody has the datasheet? The one from Yamaha IC chips is poorly detailed and ther is no diagram... Thx for any help ;-) M [Non-text
Re: [yamahacs80] CS 80 shipping
2010-07-07 by David Rogoff
Sorry folks - I thought I was replying directly to Tom. Just as well - anyone have advice? David ... [Non-text portions of this message have been removed]
Re: [yamahacs80] CS 80 shipping
2010-07-07 by David Rogoff
I don t have recent info. When I sold my CS80 about 4 years ago, I think it was only $1000 to build a shipping case and send it to London! I think you should
CS 80 shipping
2010-07-07 by tmoravan
I was looking to ship my CS 80 from Maryland to California and got a quote from Craters and Freighters (recommended and used by a few list members). They
Re: [yamahacs80] no aftertouch problem solved
2010-07-07 by David Rogoff
Thanks for the tips!
Re: [yamahacs80] no aftertouch problem solved
2010-07-05 by gavin curtis
You need to be careful and make sure that the keyboard rack is pulled completely forward before lowering it out of the upright service position. Otherwise
no aftertouch problem solved
2010-07-04 by zenithaudio2003
Hi long time since i last posted . I figured out a nice little problem on my cs-80 . have a look . http://www.flickr.com/photos/31603983@N05/4762147122/ i am
Looking for an IG00152, Ch II Detune Pot (Maybe a CS80/60 Voice Card)
2010-06-21 by mborish_2000
I would like to buy an entire CS-80/60 M board and CH II De-tune Pot for a CS-80 if anybody has one or all of these parts available If you don t have the CS-80
Re: What's the best way to test for a bad IG00152 EG-VCF on an M-Board?
2010-06-19 by mborish_2000
After a IG00152 and IG00151 swap, I figured out that the IG00152 was bad. Thanks. -Mike
Re: What's the best way to test for a bad IG00152 EG-VCF on an M-Board?
2010-06-18 by Quazimodo
That s the filter envelope chip. I had one go a while back, go to panel, set your resonance and filter so the envelope has max effect and play with the filter
What's the best way to test for a bad IG00152 EG-VCF on an M-Board?
2010-06-18 by mborish_2000
I think that mine is bad on CHII Voice 8. It ramps up, sustains at full blast until I let go of the Key, then ramps down.... I think. It s really hard to
Re: Beginning of analog season
2010-06-14 by Quazimodo
Have fun David..! Cheers, TOM
Beginning of analog season
2010-06-14 by David
Hi all. Hope you are all coming up on a good summer. I m starting the season by fixing up some nice analog polysynths:
Re: [yamahacs80] Try this with a real CS80 (or most any keyboard)
2010-06-02 by Max Fazio
Laurie s right, don t do it, Dave... M ... From: David To: yamahacs80@yahoogroups.com Sent: Wednesday, June 02, 2010 2:27 AM Subject: [yamahacs80] Try this
Re: [yamahacs80] Try this with a real CS80 (or most any keyboard)
2010-06-02 by Laurie Curry
Actually David, I was in a rollover accident with my roland JX3p back in the 80s... no case... I was in the back seat with it at the time....I remember seeing
Re: [yamahacs80] For sale......
2010-06-02 by Laurie Curry
You really dont want to get rid of your CS80 for Bank Hassles.....im talking you out of that one... Banks make money out of thin air.... there is no thin air
Try this with a real CS80 (or most any keyboard)
2010-06-02 by David
http://www.youtube.com/watch?v=jmjSgzphHg0 Of course, with the CS80, you and the synth would be broken beyond repair!
For sale......
2010-06-01 by Adrian
After a lot of thought, wife chat, bank hassle etc I ve put my baby on ebay. I still might be able to sell some other gear to keep her so i may pull the
Re: [yamahacs80] Re: KAS / YM26600 question
2010-05-28 by gavin curtis
Do other keys respond normally aside from the stuck note? I had problem where 8 notes stuck. Problem was bad CMOS hex inverter on the KAS board that
does anybody have a ym26700 for sale?
2010-05-27 by mborish_2000
I think that mine is dead. I am in the United States. -Mike 312-363-7286
Re: KAS / YM26600 question
2010-05-27 by mborish_2000
I wouldn t bother calibrating the thing until you replace ALL of the electrolytics and CMOS. I had several of each in mine that were failing.. ON EACH BOARD!
Re: CS-80 key trigger problem and the fix
2010-05-19 by tmoravan
... Have you verified it is not a problem with a particular voice card? If the problem isn t in the voice card, take a look at the KAS schematic (either the
New CS80 Vid.
2010-05-17 by Scott Metzger
http://vimeo.com/11816465 17 minutes of improv [Non-text portions of this message have been removed]
Re: CS-80 key trigger problem and the fix
2010-05-15 by mborish_2000
I think that I might have the same problem. My keybed acts funny from the top key down to the C#. It will trigger, somewhat strange noises, if I have another
Re: CS80 pedals?
2010-05-11 by Daniel
Very Cool, I ve wanted to a replacement for the expression pedal since i have owned this beast. Looking forward to trying them. Thanks
Re: CS80 pedals?
2010-05-11 by Daniel
Very Cool, I ve wanted to a replacement for the expression pedal since i have owned this beast. Looking forward to trying them. Thanks
Re: Blade Runner - Untitled
2010-05-02 by Rescio
just listened...only bits and peices it was to horrible, this is a major joke! this is not Vangelis. Alessandro
Re: Blade Runner - Untitled
2010-04-30 by Quazimodo
Any would be CS-80 that can be heard through the industrial cacophony that is the backing, is only a boring monophonic line that seems to be repeated in
RE: [yamahacs80] Re: Blade Runner - Untitled
2010-04-30 by Scott Metzger
I didn t listen long enough to the clip, but did you happen to hear any Poly AT? That is usually the first giveaway. To: yamahacs80@yahoogroups.com From:
Re: Blade Runner - Untitled
2010-04-30 by PeterB
I guess I would agree that this couldn t be Vangelis and if it s only for the simple fact that if this were a Blade Runner Vangelis track it would have been
Re: Blade Runner - Untitled
2010-04-30 by zaum
yes, I think it sounds like the plug-in. Vangelis playing the real thing would have all the and articulation articulation and nuance of the real thing. My
Re: [yamahacs80] Re:Blade Runner - Untitled
2010-04-29 by Wavecomputer360
I don´t think it´s Vangelis. Even though he was into more off-the-wall experimentalism at that time ( See you later ), he most likely wouldn´t have created
RE: [yamahacs80] Re:Blade Runner - Untitled
2010-04-29 by Scott Metzger
Sounds like the CS80 plugin. To: yamahacs80@yahoogroups.com From: zaum@optonline.net Date: Thu, 29 Apr 2010 07:25:40 -0400 Subject: [yamahacs80] Re:Blade
Re:Blade Runner - Untitled
2010-04-29 by PeterB
I agree that this is extremely clean sounding and definitely not from a cassette. I remember that on one of the many Blade Runner soundtracks there was music
Re:Blade Runner - Untitled
2010-04-29 by zaum
... I d say that s a hoax. Vangelis leads have an assurance that comes with keyboard mastery as well as a particular logic to his melodies even on an off day
Blade Runner - Untitled
2010-04-28 by PeterB
Hey Guys, check this out, a friend has directed me to this: http://www.youtube.com/watch?v=U-HtAFZMDqI Apparently, this untitled piece of music was V´s first
Re: KAS / YM26600 question
2010-04-27 by tmoravan
OK - I know what the problem is for the stuck voice. The difficulty is fixing it. :-) If I take voice card M4 out of the rack and move it around, the voice
Re: [yamahacs80] Re: KAS / YM26600 question
2010-04-21 by Csaba Zvekan
Great ! Keep up the good work . Remember the more you ll replace the better it ll sound . Continue replacing 4000- CMOS chips . Now it would be a great to
Re: KAS / YM26600 question
2010-04-20 by tmoravan
Well, I have sound again. Now back to the stuck on note and another with the wrong pitch. I replaced the two 4558 s and the 2 4069 s on the KAS and now the
Re: [yamahacs80] Re: KAS / YM26600 question
2010-04-18 by Csaba Zvekan
Hmm ... continue refreshing the CMOS chips to newer parts and replace all capacitors maybe even the trimm pots for the SH, KAS boards. What about decoupling
Re: KAS / YM26600 question
2010-04-18 by tmoravan
Good questions. Power supply has been recapped, new regulators, etc. I replaced the 4000 CMOS ICs on the TKC board. The synth was playing, but I was having
Yamaha YC30 ribbon controller question
2010-04-18 by Wavecomputer360
Hi all, I´m currently in the process of dusting off my old YC 30 which has been sitting unused in storage for a couple of years. When opening it, I couldn´t
Re: [yamahacs80] KAS / YM26600 question
2010-04-18 by Csaba Zvekan
Hi , Let us know what has been done/restored previously to this particular YAMAHA CS-80 ? Are the original 4000-Series CMOS chips still in there ? Have you
KAS / YM26600 question
2010-04-18 by tmoravan
OK - time to yell for help. Cleaning up a CS-80, and there s no voices sounding when playing a key. Started debugging at the KAS. All power looks good, note
Re: CS80 pedals?
2010-04-13 by Jussi
Cool! Thank you all! I was unsure of the pedals, so better to ask than to be sorry.. The CS80 is a wonderful instrument. I m happy to have finally gotten one!
Re: CS80 pedals?
2010-04-12 by simon
I use the FC7 and FC4 and have had no problems. The FC4 works perfectly for sustain and/or portamento, whilst the FC7 can be used for expression/volume -