Re: WTB: Yamaha CS-80 wheel/caster socket
2012-05-31 by scituate_mass
Hey Mitch, I have some wheels from Electone organs of that era. Send me or post a picture and if it matches you can just have it for the price of shipping.
Messages
Browse messages
Page 21 of 95 · 4740 messages matched
WTB: Yamaha CS-80 wheel/caster socket
2012-05-31 by Mitchell Manger
My Yamaha CS-80 is missing one of its four wheel/caster sockets, so I need a replacement. Does anyone have a spare CS-80 wheel/caster socket for sale? I
pitch bug on CS60?
2012-05-30 by Max Fazio
Hi all I experienced a strange thing on a CS60: if I play the highest C note at high footage, then pitching up one more octave through the ribbon controller,
Re: Troubles with CS70M
2012-05-28 by exxosstudio
... Hello, Thank you for your suggestions :) Next step will be to find a tech. here near Paris and unfortunately most are fully booked :/ Anyway if some
Re: Troubles with CS70M
2012-05-28 by scituate_mass
Since you are advising Ludo to replace CMOS here... Does anyone know if you can use either buffered or unbuffered 4000 series ICs? I ve run into some trouble
Re: [yamahacs80] Troubles with CS70M
2012-05-27 by Csaba Zvekan
Hi Ludo, Both problems are mostly likely due to age. Bad or very old capacitors can cause all sorts of problems. Replace all of them in your Power Supply. Then
Troubles with CS70M
2012-05-27 by exxosstudio
Hello everybody, I m new here. Owning a CS80 is my dream, unfortunately, they are almost impossible to find below $10,000 now, so I think it will remain a
Re: Yamaha CS60 with midi for Sale (or parts)
2012-05-26 by synthparts
Yes it does seem a shame to part out a nice, working CS60 that was recently resored and with MIDI installed... I still have some parts left over from a CS50
Re: [yamahacs80] Re: Yamaha CS60 with midi for Sale (or parts)
2012-05-25 by Kurt Bujack
Honestly, there is a value in Parts from a CS-60 to revive a CS-80. However, I believe that any synth that is utilized as parts for another, should in itself
Re: [yamahacs80] Re: Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by T.M. Bois
Indeed, it seems vintage synths--and vintage instruments in general--are only affordable to collectors now. Oh well, at least struggling musicians still have
Re: [yamahacs80] Re: Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by Jared Tauben
time s are changing.... ________________________________ From: Quazimodo To: yamahacs80@yahoogroups.com Sent: Thursday, May 24,
Re: Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by Quazimodo
That is more than double what I paid for my more *expensive*, second CS80...! Cheerz, TOM
Re: [yamahacs80] CS 80 Ribbon controller
2012-05-24 by Fernando Zarone
I completely second this, Damon. The procedure is the same as the one I applied successfully. I add some more caveats: 1) You ll need help, at least 6 hands in
Re: CS 80 Ribbon controller
2012-05-24 by siwanyzki
Thank you for taking the time to reply. This is good info. I might photograph the procedure since the info is not out there.
Re: [yamahacs80] Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by T.M. Bois
Holy smokes--that s what I paid for my CS80! Honestly guys, with the economy being what it is, it s a buyer s market out there and I really don t see synths
Re: [yamahacs80] Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by Jared Tauben
I m located between Stowe, Vermont and Montreal, Quebec. For the synth complete, i m looking for something around $4500. Thanks, Jared
Re: [yamahacs80] Yamaha CS60 with midi for Sale (or parts)
2012-05-24 by b3groover
What are you asking for the whole synth and where are you? ... [Non-text portions of this message have been removed]
Re: CS60 slaughter...
2012-05-24 by Rainer
While we re at it praising the CS60: check out these improvisations to see what I mean, I performed them solely on a CS60:
Re: CS60 slaughter...
2012-05-24 by Rainer
Here in The Netherlands I ve seen two or three sold last year for around EUR 3500 (+- USD 4400) within max 2 weeks of advertising it on a site dedicated to
Re: [yamahacs80] CS60 slaughter...
2012-05-24 by robert hall
well said ... From: Rainer Keizer Subject: [yamahacs80] CS60 slaughter... To: yamahacs80@yahoogroups.com Date: Thursday, May 24,
Re: CS60 slaughter...
2012-05-24 by Jared Tauben
so what is a complete CS60 in almost perfect condition worth? what price would you sell yours for if you had to? that s the question...
Re: [yamahacs80] CS60 slaughter...
2012-05-24 by Andrew Kirkby
Rainer, +1 on this. I don t think i will ever let my CS60 go... It is such a nice instrument to play and experiment with. Now that i restored all of the
Re: CS 80 Ribbon controller
2012-05-24 by scituate_mass
Hi... I can barely remember how I did it. I asked someone who recently did the job (Fernando) to check out your post. Maybe he ll chime in. Here are some vague
CS60 slaughter...
2012-05-24 by Rainer Keizer
It gives me pain to see (again) someone offering a CS60 in good condition, which he is willing to slaughter for parts. The CS60 is a rare and desirable musical
Re: cs 60 legs
2012-05-23 by Jared Tauben
hey, i m new to the list. noticed you re looking for CS60 legs. I have the legs with carrying case for sale. let me know if you re still interested. thanks!
Re: [yamahacs80] CS 80 Ribbon controller
2012-05-23 by Fernando Zarone
I have a couple of springs for spare, could trade one for rare ICs or sell if somebody need it. The replacement, yes, is a little tricky, not for the
Yamaha CS60 with midi for Sale (or parts)
2012-05-23 by Jared Tauben
Hi everyone, I m reluctantly selling my beautiful CS60. The synth is in amazing condition. 9/10 cosmetically. Only the top cover tolex i d rate 7/10. It has a
Re: [yamahacs80] New cs80 technican in Fayetteville,NC
2012-05-23 by Jason Serber
Hi Thorsten, any thoughts on how to fix a yamaha cs-15 sustain note problem? it sounds like stuck notes, they just hang. thanks Jay ... [Non-text portions of
New cs80 technican in Fayetteville,NC
2012-05-23 by Thorsten P.
I just wanna let you know that I ve been temp. relocated from Germany to Fayetteville, NC (3 years). Back in Germany I took care of some cs80 s and other
Re: CS 80 Ribbon controller
2012-05-23 by siwanyzki
Thank you for your answer. There is nothing that explains the procedure in the past messages and no photos. I thought that somewhere on the Internet there
Re: [yamahacs80] CS 80 Ribbon controller
2012-05-22 by David Rogoff
I ve done one. It s a little tricky but obvious once you do it. I don t have time to write much now but I think I did back then so try searching the message
CS 80 Ribbon controller
2012-05-22 by siwanyzki
I got one of the ribbon controller springs from RL Music. Does anyone know how the spring is changed or any details which would help?
New file uploaded to yamahacs80
2012-05-17 by yamahacs80@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the yamahacs80 group. File : /organ1
the Spike mistery
2012-05-17 by Max Fazio
Hi all Time for a tech question , hope someone could shed some light on it. While getting some values to check the calibration of the TRG boards I stumbled
Re: [yamahacs80] CS80 patch on a Korg PS....!?
2012-05-07 by Tommy Priakos
Amazing, I could definitely hear that coming from a CS-80! Sent from my iPhone ... [Non-text portions of this message have been removed]
CS80 patch on a Korg PS....!?
2012-05-06 by Quazimodo
Hi guys - this is only CS80 related in that I (accidentally) managed to make my most recent acquisition sound like my CS80...! Close your eyes when you re
Re: SY-1 problem
2012-05-02 by synthparts
If it s the same one as the CS50/60 I have one. Doug synthparts.com
Re: SY-1 problem
2012-05-01 by Quazimodo
Personally Fernando, I think that your LDR is faulty - going off your findings. That is just a 20 ohm swing. Let me get round to it and I ll try and check the
Re: [yamahacs80] SY-1 problem
2012-05-01 by Fernando Zarone
Thanks; I have done it, Tom, after being disconnected, the light sensitive resistor varies from 195 Ohm (no pressure) to 175 Ohm (max pressure) Is it correct
Re: SY-1 problem
2012-05-01 by Quazimodo
With a meter on ohms. I would disconnect the LDR from the circuit whilst checking..! Cannot say what the spec should be but if there is no touch sense - there
Re: [yamahacs80] SY-1 problem
2012-05-01 by Stephen Parsick
I seem to have the same issue with my YC-30 and YC-45D organs. I can´t actually tell whether it´s an issue or not as I never had any other YC to compare it
SY-1 problem
2012-05-01 by papinje
Hello. the touch control in a SY 1 does not work. With TC sensitivity potentiometer at its maximum, the touch controlled effects go to the maximum, but are
Re: Trouble with trimmers
2012-04-09 by Jussi
Fixed it :) Short jumpers from tab to tab and some glue and it s working again!
WTB or WTT: Yamaha CS-80 right cheekblock: $350
2012-04-08 by Mitchell Manger
Hi, Can someone sell or trade me a Yamaha CS-80 right cheekblock? I own a Yamaha CS-80 that has a right cheekblock that was modified, as someone replaced the
Re: Trouble with trimmers
2012-04-07 by Jussi
Looking at the pcb, I wonder if I could just solder a short lead from tab to tab following the traces? Then apply a drop of glue to hold the trimmer in place?
Trouble with trimmers
2012-04-07 by Jussi
Hey On my CS80 the 16 trimmer of OSC 3 has come loose from it s tabs. That is, the tabs themselves have lifted off from the pcb. :( I m not afraid to fix it
[POSSIBLE SPAM] [yamahacs80] Re: I hope this is something simple...
2012-04-07 by scituate_mass
Steve, The VCFs in the E70 are not the same (at least if we go by the model numbers) as the CS-synth filter ICs. You would have to find an E30 to get them.
[POSSIBLE SPAM] [yamahacs80] Re: I hope this is something simple...
2012-04-07 by Mike
Well, if you shorted it out somewhere deep in the circuitry, rebuilding the PSU and other boards won t make much of a difference. If you don t know how to
Re: [yamahacs80] Re: Yamaha E70 Voice Cards in a CS80
2012-04-05 by Steve
VCF not VCR, sorry. Auto correct. My auto correct dictionary has many many keyboard related words in it and STILL everyday I find a new word that is related
Re: [yamahacs80] Re: Yamaha E70 Voice Cards in a CS80
2012-04-05 by Steve
I have one voice card in my cs50 that the VCR chip may be bad in it. It has to be calibrated completely differently for the filter sweep to sound anywhere