Emu XL-7 & MP-7 User's Group

You still have the silkscreen template for the XL7 right?  Could you take an
overhead picture of it scanned at a higher resolution and post it?  That way we
could get it scaled and use that for the  base for the etching.  Either that or
one of the pictures of your case off (no knobs or anything) :)

Andre

-----Original Message-----
From: erik_magrini@... [mailto:erik_magrini@...]
Sent: Monday, March 31, 2003 11:41 AM
To: xl7@yahoogroups.com
Subject: RE: [xl7] Tap Combo's


Definitely do able.  You could even take it to a glass store and get it
etched into a sheet of 1/16th plexiglass if you wanted something a little
more durable and nicer looking than cardboard.  As long as you give them a
template, it's not too expensive to do this.  I had something similar done
back when I used to compete in car audio contests, it was cheaper than I
thought it would be.

rEalm



Or we could make a thin cardboard cuttout to drop over the whole thing,
word
template style.




[Non-text portions of this message have been removed]



To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/