Emu XL-7 & MP-7 User's Group

M2,
Thanks for the reply.  I have setup the BTS mode as you said.  I 
have the first part of the Trancer BTS (kick) triggered on the first 
pad (C)at the lowest transpose setting, snare on c# etc.  Now when I 
try to record I can hear the BTS play, but when I hit stop then 
playback the pattern, all I hear is a Kick no matter which pad I had 
recorded.
-grimley


--- In xl7@y..., "emufreak1" <mmcquay@m...> wrote:
> If that doesn't work for you, refer to page 5 on the OS 1.31 
addendum 
> page 5(top).  It says to set the trigger button feature to "play 
> beats parts"
> 
> Later........
> 
> 
> 
> 
> --- In xl7@y..., "emufreak1" <mmcquay@m...> wrote:
> > http://groups.yahoo.com/group/xl7/files/beatkey.jpg
> > 
> > Grimley,
> > 
> > Refer to the above file and try using your *keypads on your unit 
> > instead of the trigger buttons.  Play around with the transpose 
> > button until the first pad(C)gives you the kick drum on Trancer. 
> > (C#1) will give you snare and (D)will give you hi-hat and so on.
> > 
> > Now with the BTS parts set to either latch or unlatched, try 
> > recording the parts.  If you have the parts needed unlatched, 
you 
> > will have to hold the pad down until you want it to stop(note 
> on/off 
> > command), if you have it set to latched, you can press the pad 
once
> > (note on) and come back to it when you want it to stop by 
hitting 
> the 
> > pad again(note off).  Each part has it's own velocity setting as 
> > well. 
> > 
> > Try it out.
> > 
> > Later,
> > 
> > M2
> > 
> > 
> > 
> > --- In xl7@y..., "grimleyj2000" <grimley@i...> wrote:
> > > >>>Yes you can, set the BTS part to unlatched and record the 
> > Trigger 
> > > press while you sequencer is set tot eh right MIDI channel. 
<<< 
> > > 
> > > Realm,
> > > Thanks for the lengthy reply ... appreciated.  I am not having 
> much 
> > > luck though with recording the triggers.  I have a BTS preset 
on 
> > > channel 2A - bts:Trancer.  I have the Trancer bts riff 
assigned 
> to 
> > > it from the Preset edit menu.  I then go into the ARP / Beat 
keys 
> > > Layout menu and change all the parts 1-16 to unlatched.  I 
still 
> > > cannot record the triggers on channel 2.  I can hear the BTS 
when 
> > > recording but when I play back the pattern ... nada.  I also 
> tried 
> > > changing the BtsCh and TrigCh.
> > > Any suggestions?
> > > Thanks,
> > > Justin.