Are you using OS 1.31? That should have been fixed in the new OS...
rEalm
heyrag@...
04/10/02 04:45 AM
Please respond to xl7
To: xl7@yahoogroups.com
cc:
Subject: Re: [xl7] to mike as in mikes rant
>I work with my mp7 and its seq similarly , that is often subtle
>differences in the same seq as adding a drum roll or bringing new inst.
in
>or out for dynamics etc. I also experience timing delays (way too often)
>in going from one seq to the next. I am almost 100% sure this has
>something to do with the info at tic 0 or 1 (or both) See "event timing"
>in manual, may be in the 1.18 addendum. Anyway, I found a fix for this
>which has worked (don't claim to know why) for me. If you copy the
pattern
>that is giving you timing problems into an empty pattern and then copy
>that new pattern back to the old spot, the problem goes away...a bit of a
>pain but better than sloppy timing...hope you find relief.
To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/Message
Re: [xl7] to mike as in mikes rant
2002-04-10 by erik_magrini@Baxter.com