Synth-DIY Yahoo! Groups Archives

On the Orbit 3, and the like, hold down the left and right curser buttons and turn on the power. This will get you to diagnostics mode, there are a few that you can cycle through but when you get to the midi loop test you need to connect the midi in to the midi out. If not it will fail. When finished turn off then back on, to check for the roms curser to the "user" and turn the data wheel, you should see "Tecno" and "Beat", the 2 that come with, they take up two of the four slots. Hope you enjoy it as much as I have.

Good luck.

TOMTEL

--- On Mon, 4/12/10, Atom Smasher wrote:

From: Atom Smasher
Subject: [xl7] orbit-3 diagnostic mode?
To: xl7@yahoogroups.com
Date: Monday, April 12, 2010, 8:11 AM

slightly off topic, but i'm sure there are some orbit experts on the
list...

in the next day or so i'll be picking up an orbit-3. before i hand over
the $$$ is there a diagnostic mode, like the XL-7? is there a quick way to
check what ROMs are installed, without a screwdriver?

thanks...!

--
...atom

____________ _________ ___
http://atom. smasher.org/
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
------------ --------- --------- --------- --------- -

"I believe that banking institutions are more dangerous
to our liberties than standing armies."
-- Thomas Jefferson

Emu XL-7 & MP-7 User's Group

Re: [xl7] orbit-3 diagnostic mode?

Attachments

Move to quarantaine